Top 10 80W Laser Tube UK – Engraving Tools

As an Amazon Associate I earn from qualifying purchases.

1. TEN-HIGH

TEN-HIGH CO2 Glass Laser Tube 80W 1250mm Length, 80mm Dia for Laser Engraving and Cutting Machine …

TEN-HIGH - Easy installation: the wire on positive pole and negative pole had been connected in advance, just connect to the wire on the machine and cover with insulating tape will be ok. Unique technology: with excellent sealed-off technology to divide air and prevent inside gas diffusion, the laser tube will be more stable and efficient.

About the installation of laser tube, here is a video for your reference : https://youtu. Be/mbwyveQZPZ8. Strong heat resistance:the tube body is made of glass containing high borosilicate, the tube body is hard, and it is not easy to crack at high temperature, not easy to deform, heat resistance is strong, the service life can reach 1500H-2500H under normal use.

Stable output: single mode output mode, fine spot, strong penetrating power, no change in long-term use spot mode. Application: this co2 laser tube compatible with all the co2 laser engraving and cutting machine that used laser tube as power, like the diameter and length, but please make sure your machine's installation space, all should be a little bigger than laser tube's size.
BrandTEN-HIGH
ManufacturerTEN-HIGH
Part NumberTH-80WCO2LT1250

2. Orion Motor Tech

Orion Motor Tech High Power 80W Laser Tube for CO2 Laser Engraver Cutter Marking Machines 8000hr Hard Borosilicate Glass 1250mm Length 80mm Diameter Tube 98W Max Output

Orion Motor Tech - Specifications: this borosilicate glass laser tube is 1250 mm 4' 1. 2" long and 80 mm 3. 1" in diameter; your machine should have a little bit more space to allow proper fit. Powerful laser tube: orion motor tech's co2 laser tube is rated at 80w and can sustain beams as high as 98W for short periods of time, although this will shorten its 8000-hour service life; it operates at 19 kV and 25 mA or less.

Safe and sound: the inner tube for the engraving laser beam is surrounded by a water pipe and hermetically-sealed outer tube to keep it cool and high functioning; ports at either end allow easy connection to your water reservoir and pump. Versatile engraving tool: installed in your laser machine, cloth, ceramic, and wood engraver, plastic, paper, this tube's 4.5

5 mm 018"-diameter beam can work as an acrylic, glass, leather, cardboard, cutter, and marker. Installs in minutes, lasts for years: preinstalled connection wires allow easy hook-up, while Orion Motor Tech's strong warranty and friendly customer service ensure you'll enjoy the laser's full 8000-hour service life.
BrandOrion Motor Tech
ManufacturerLaser Tube

3. MCWlaser

RECI CO2 Laser Tube 80W Peak 100W 1240mm W2/S2 and DY13 Power spply for Laser Engraving & Cutting Shipping from Europe VAT & Duty Free

MCWlaser - As the upgrade and power improve of w seris in 2019, to ensure the better compatible, we will send W1 tube and DY10 power supply, W2 tube and DY13;W4/W6/W8 tube and DY20.

We have 18 months warranty for w1, w2, and W4, and 12 months warranty for W6 and W8 laser tube. We send the items by dhl/fedex/ups air express, door to door service, 4-5 working days delivery to US and Europe. The service life of tube is about 10000 hours. We insure the tube when ship, if there is any broken in transport, we will send the new one free again depend on the broken photos and damage report from courier. The w series w1, s4, w8 can replac the old model s series S1, W2, W4, S2, W6, S6 S8 tube well.
BrandMCWlaser
ManufacturerShanghai Top Nine Industrial Co.,Ltd

4. TEN-HIGH

TEN-HIGH CO2 Glass Laser Tube 80W 1250mm LengthPeak Power 90W, Easy Installation and Stable Power, 80mm Diameter for Laser Cutter and Engraving MachineUpgraded Version

TEN-HIGH - Special design on positive pole: for high-voltage wiring, adopts new tin soldering technology & insulation heat-shrinkable tubing and insulation silicone protective sleeve solves the leakage and static electricity problems that are often happened when using the old version laser tube, and will no longer cause the dust to be charged to generate crackling discharge noise.

Easy installation:the high voltage protective sleeve on positive pole and the terminals on negative pole had been connected in advance, just connect the high-voltage sleeve and the wiring terminals to the positive and negative poles of the laser power supply respectively will be ok. Stable output: with excellent sealed-off technology to divide air and prevent inside gas diffusion, the laser tube has very stable output power and good spot mode.

Metal head: with metal head on the negative pole, it is not easy to crack like the glass head style and more resistant to high temperatures. Special coating technology: this co2 laser tube adopt inner discharge tube coated with nanogold catalyst technology, power is 10% improved, and service life is 20% longer than ordinary laser tube, better chooice for the people who has heavy workload and long working hours.
BrandTEN-HIGH
ManufacturerTEN-HIGH
Part NumberTH-D-80W-L1250-D80-UK

5. VEVOR

Laser Engraving Power Supply for Laser Engraving Machine, VEVOR Co2 Laser Tube Laser Power Supply 80W, Laser Tube

VEVOR - This power supply uses a zero-current half-bridge soft switching circuit to make the power supply respond quickly and easily cooperate with the co2 laser tube. Long service life- the laser tube 80w uses special coating technology inside, which greatly improves the service life.

At the same time, a protection switch is added to detect whether there is water or ventilation outside. Simple port control - suitable for high and low-level signals. Temoo mode & fast response- the 80w laser tube adopts the temoo mode, which is characterized by high spot concentration, high energy density. The laser tube power supply has an open circuit protection function to avoid damaging the laser power supply. Use the ttl level to control the laser start and stop. Product parameters- co2 laser tube: power output: 80w, max output voltage: 26kv, beam diameter: 2.

5mm,   length: 1230mm, Wavelength: 1064microns; co2 laser power supply:power: 80W, Input Voltage: AC220V, Max Output Current: 28mA. Works cooperatively- the laser power supply has a good matching performance with the laser tube, and can be directly connected to the laser; the power supply can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser.
BrandVEVOR
ManufacturerVEVOR

6. TEN-HIGH

Voltage Stability, TEN-HIGH 80W CO2 Laser Power Supply with LCD Display for 80W Tube Laser Engraving Machine

TEN-HIGH - Open circuit protection function Avoid damaging the laser power supply due to the bursting of the laser tube. Convenient test comes with a light emitting manual test button, which is convenient for testing the laser tube and power supply, and is easy to maintain.

Simple laser power control it can be controlled by 0 ~ 5V analog signal or 5V PWM signal. Adaptability built-in active pfc circuit to achieve higher power factor and meet universal input voltage range AC90-264V, 50 / 60Hz. Application used in high-end cO2 laser engraving machine, precision laser cutting machine, laser marking machine, laser cutting machine, laser cutting.
BrandTEN-HIGH
ManufacturerTEN-HIGH
Part NumberTH-HYJG-ESA80-UK

7. By Air

RECI CO2 Laser Tube 80W Peak 100W 1200mm W2/S2 and DY13 Power spply for Laser Engraving & Cutting Insurance & Air Express

By Air - We insure the tube when ship, if there is any broken in transport, we will send the new one free again depend on the broken photos and damage report from courier.

As the upgrade and power improve of w seris in 2019, to ensure the better compatible, we will send w1 tube and DY10 power supply, W2 tube and DY13;W4/W6/W8 tube and DY20. We have 18 months warranty for w1, w2, and W4, and 12 months warranty for W6 and W8 laser tube. We send the items by dhl/fedex/ups air express, door to door service, 4-5 working days delivery to US and Europe. The service life of tube is about 10000 hours. The w series w1, s4, w6, s2, w4, w2, w8 can replac the old model S series S1, S6 S8 tube well.
BrandBy Air
ManufacturerBy Air

8. Hanchen

Hanchen 80W CO2 Laser Engraver Tube Water Cooling

Hanchen - Adjustable core size 1-4inch core Three-second unloading: Remove the core by using only one wrench: Please refer to the picture.
BrandHanchen
ManufacturerHanchen
Part NumberC-199

9. Reci

Reci CO2 Laser Tube 80W Peak 100W 1240mm W2/S2 18 Months Warranty for Laser Engraving Cutting Shipping from Europe Free Duty & VAT

Reci - The w series tubes are better to work with compatible power supply. The service life is about 10000 hours. The w series w1, w6, s2, w8 can replac the old model S series S1, w4, s4, W2, S6 S8 tube well.

Our suggestion is that w1 works with dy10, W2 works with DY13;W4/W6/W8 works with DY20 We have 18 months warranty for w1, and W4, W2, and 12 months warranty for W6 and W8 laser tube. We insure the tube when ship, if there is any broken in transport, we will send the new one free again depend on the broken photos and damage report from courier. Shipped from europe; free duty& VAT;Fast delivery. The ce and fdA cetification can be avaiable.
BrandReci
ManufacturerReci
Weight22 kg (48.5 Pounds)

10. VEVOR

VEVOR Laser Tube 80W CO2 Laser Tube 1230mm Glass Laser Tube Professional Special Coating Technology Tube Laser Cutting Tube for Laser Engraving Machine and Cutting Machine

VEVOR - At the same time,  the use of output mirrors further enhances the mode. Special coating technology- the inside of the discharge tube imported German Schotter tubeuses the special coating technology. The coating is a reduction catalyst mixed with materials such as rare earth and gold.

It is resistant to high temperature and high pressure. Temoo mode- the co2 laser tube adopts the temoo mode, which is characterized by high spot concentration, high energy density as well as good and stable spot. Longer service life- our service life of discharge tubes coated with special catalysts is greatly improved. Various application- professional 80w laser, cloth, one of the spare parts of CO2 laser engraving machine, leather, widely used in engraving and cutting acrylic, bamboo, wood and other materials.

Compared with other laser cutting tubes, our 80W CO2 laser can last for more than 7, 000 hours. High temperature resistance- this laser tube is made of the boron silicate glass that is also applied on the solar tubes.
BrandVEVOR
ManufacturerVEVOR
Height25.4 cm (10 Inches)
Length132.08 cm (52 Inches)
Weight14.51 kg (32 Pounds)
Width27.94 cm (11 Inches)
Part Numberlaser tube