As an Amazon Associate I earn from qualifying purchases.
Maclean MCE 84 Touchless Infrared Switch 5A 110-240V / AC 50/60Hz MCE84Maclean
- This device is used to automatically start the light when the person appears in the sensing IR. The sensor turns on when detect the hand movement at a distance of 5-6 cm, and turns off the light on the next hand movement.
Using an infra-red sensor it detects movement in short distance. The sensor has no timer, so you can't set the operating time of lighting. The product is used for automatic light control. Perfect for automatic light control in cabinets, closets etc.
|Height||10 cm (3.94 Inches)|
|Length||5 cm (1.97 Inches)|
|Weight||0.25 kg (0.55 Pounds)|
|Width||5 cm (1.97 Inches)|
Lighting PIR Sensor Switch,Lighting Infrared on/Off Motion Sensor for Wardrobe Home Cupboard KitchenPHILED
- Universal diy switch used in the bathroom mirror, bathroom cabinets, cabinets, Shoebox, wardrobe, LED lamps ect. Move hand - lights turn on stays on ; Second move hand - Lights turn off Stays off.
Rated input voltage: ac85-250v ; Rated output voltage: AC85-250V. Power frequency: 50/60hz ; environment temperature:-20℃~55℃. Detection range: less than 8cm ; Protection:IP40 Waterproof.
EMylo Exclusive and Compact Non-touch Infrared Sensor Switch with Tempered Glass Pannel AC100-240V 50/60Hz High Sensitivity 8cm 10AChatthen
- Cool and fashionable design. Non-touch infrared optical sensor and high sensitivity. Easy to install. Versatile and compactible.
Without direct physical touch with the switch, it could avoid infections of the virus and bacteria. You can control the light by handing close to the switch about 8cm easily.
Outdoor IP44 Waterproof Adjustable PIR Body Motion Infrared Sensor Detector Light Bulb Switch, PIR Sensor Switch, Home Lighting Switch with 160° Detection Range 110V-240Vblackeecoo
- If you have any quality problems, please contact our after-sales customer service. Waterproof and weatherproof, also suitable for outdoor use. Motion sensor: the sensor switch adopts infrared human body motion sensor technology, which can realize intelligent control and energy saving.
Easy to install：the led infrared sensor head is automatic, convenient, safe and practical. Wide application: ceiling or wall-mounted installation, suitable for corridors, incandescent bulbs, exhaust fans, alarms, compact fluorescent lights, garages, toilets, etc.
Terraces, widely used to control LED lights, corridors, etc.
The detection distance, ambient light and delay time can be adjusted according to your actual needs. Long service life: the infrared motion sensor is made of high-quality plastic, strong and durable, which is not easy to age, and can be used for a long time. High quality: the adjustable pir sensor head has an exquisite design, high sensitivity and stable performance.
|Height||5 cm (1.97 Inches)|
|Length||15.5 cm (6.1 Inches)|
|Width||8.5 cm (3.35 Inches)|
Range max. 9m/160°, Wall Flush Mounted, IP20, Infrared Motion Sensor, SEBSON PIR Sensor Light Switch Indoor, LED suitableSEBSON
- Sebson motion detector for indoor use and for flush wall mounting, installation dimensions 79x79x43mm, 3-Wire. The detection range of this infrared sensor is 9m and 160°. The duty cycle is 10 seconds to 7 minutes or permanently on or off.
Scope of delivery: 1 x SEBSON motion detector. The flush-mounted motion detector can even be adjusted according to the ambient brightness in the range between 3 and 2, 000 LUX. The motion detector has a maximum power consumption of 1200W for incandescent lamps, 300W for LED lamps or other energy saving lamps.
|Height||4.3 cm (1.69 Inches)|
|Length||7.9 cm (3.11 Inches)|
|Width||7.9 cm (3.11 Inches)|
BHIRH-250A Patented 250W IR Sensor Switch Dual Voltage 100-240V Intelligent Light Lamps Motion Sensing Switch IP20 5-10CM Used OUTSIDE of Cabinet ,Working by Hand Moving,Max.70W for LEDs,24 Hours ServiceHoneyFly
- Feature: patented ir sensor switch with 2m/6. 56ft cable, uv-filtering sensor head, very high quality. Usage: very easy to install, quite smart, you will be happy with it ! Caution: this ir sensor switch bhirh-250a is used outside of the cabinet door.
Ce approved. Suitable wattages: for incandescent lamps/fluorescent lamps/halogen lamps, While for LED lamps, Max. 250w, max. 70w. Applications: outside of the cabinet for Kitchen, Bedroom, Washroom etc. When you move hand in front of the sensor head, the light is on, move hand again, the light is off.
|Height||2 cm (0.79 Inches)|
|Length||8.4 cm (3.31 Inches)|
|Width||3.6 cm (1.42 Inches)|
SEBSON PIR Sensor Light Switch, LED suitable, Infrared Motion Sensor, Flush Mounted, programmable, Wall Mounted, Range max. 9m/160°SEBSON
- After a preset time of approx. Sebson motion detector for indoor and flush mounting, installation dimensions 49x49x31mm. The infrared sensor detects movements in a detection range of up to 9m at a detection angle of 160° and switches on the connected lighting.
The motion detector has a maximum power consumption of 100W for LED lamps or other energy-saving lamps.
Scope of delivery: 1 x SEBSON IR motion detector flush-mounted. The built-in motion detector can also be adjusted according to the ambient brightness in the range between 3 and 2, 000 LUX. 10 seconds to 7 minutes, the motion detector switches off again.
|Height||6 cm (2.36 Inches)|
|Length||7.9 cm (3.11 Inches)|
|Weight||0.1 kg (0.22 Pounds)|
|Width||7.9 cm (3.11 Inches)|
QWYEURO Infrared Motion Sensor Lighting Switch Wall Mounted IP44 12M Range Max.1200W whiteQWYEURO
- Time–delay is adjustable: it can be set according to your desire, the minimum is 10sec±3sec, and the maximum is 7min±2min. The qwyeuro advantage:high-quality switches specially designed for the home, and the lights go off when people walk off, the lights come on when people come, reducing energy waste.
Identify day and night automatically: the ambient light of could be adjusted according to your desire: when turn to SUN max, it will work day and night, it will only work in the ambient light less than 10LUX.
What you get:qwyeuro infrared motion sensor，instruction manual，screws with dowels，12-month warranty，and friendly customer service.
As for adjustment, when turn it to MOON min, please refer to testing way. Time-delay is added continually: when it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis set time.
|Height||8.3 cm (3.27 Inches)|
|Length||8.65 cm (3.41 Inches)|
|Weight||0.12 kg (0.26 Pounds)|
|Width||6.58 cm (2.59 Inches)|
180 Degree Angle of Detection without Blind Spots, TDL-2022WB-DC 12-24VDC 5A Infrared Sensor Switch for Light Control, 10M High Sensitivity Microwave Radar SensorDpofirs
- Sensitivity - motion sensor Detector Can penetrate glass gypsum board, wood board, acrylic board and other materials. Widely used for motion - activated leD lighting, Security System, Alarm, LED strips, Automatic Sensory Device and more.
Easy to install - adjustable light Sensor Switch Easy to install inside the ceiling advertising light box, no need to drill holes. High performance - 12vdc microwave radar sensor, control the automatic lighting of LED lamps, not affected by ambient temperature.
Infrared motion sensor detector Switch with Great workmanship and small size, convenient to use and with good performance. Detecting range - the sensing distance is 10 meters, easy to carry and store, and the sensing angle reaches 180 degrees without blind spots. Infrared sensor switches outdoor wall leD Light Controller TDL-2022WB-DC 12-24VDC.
|Height||1 cm (0.39 Inches)|
|Length||1 cm (0.39 Inches)|
|Weight||0.04 kg (0.08 Pounds)|
|Width||1 cm (0.39 Inches)|
Stemedu DC 5-24V Human Body Sensor Switch Touchless Automate Time Delay Switch Light Switch Motion Detector PIR Infrared Sensor with Adjustable Timer + Female Male DC Power ConnectorStemedu
- How to email us? please click "stemedu" you can find "Sold by Stemedu" under Buy Now button, in the new page, click " Ask a question" to email us. It does not work during the day and the light is dim at night.
This switch sensor has an additional photoresistor. If someone passes by, the light will turn on. This infrared motion sensor switch can adjust delay time, factory setting 15S 33-300 seconds adjustable. You can install ir motion sensor switch on the wall or ceiling to control the LED lamp or LED strip, it will turn on the light after detected the human motion.
The pir infrared motion sensor function triggered by motion, you can use this small motion sensor switch to control lighting of corridors, garages and other places, warehouses, toilets, basements, automatic ventilation of exhaust fans and automatic control of other electrical appliances.