As an Amazon Associate I earn from qualifying purchases.1. N\A
Inline Dimmer Switch 220-240V Knob Dimmer Switch Lights Switch for Lamps Lights
N\A - With power control lines. Applicationsuitable for all kinds of lamps, transformers, electrical appliances, etc. Materialmade of high-quality flame-retardant materials, the internal high-quality circuit board is safe, reliable, and durable.
Notebefore use, please confirm the safe wiring method, refer to figure 2. Cut the live wire and connect it to the two terminals. Sizethe size of the switch is about 7*3.
3*3. 4 cm. Please purchase it after confirming that you can use the product safely and correctly. Please check the wiring method in the wiring diagram on the right, and confirm whether this wiring method meets your needs before choosing to purchase.
Please confirm whether your light is adjustable before purchasing, or whether the dimmer can only control the light switch. Featuresconnect it between the power plug and the light, and use the manual knob to freely adjust the brightness. The wiring diagram is shown in Figure 3.
| Brand | N\A |
| Manufacturer | kuataoUK |
| Height | 2.8 cm (1.1 Inches) |
| Length | 7 cm (2.76 Inches) |
| Weight | 0.03 kg (0.07 Pounds) |
| Width | 3.3 cm (1.3 Inches) |
2. VIPMOON
VIPMOON Inline LED Dimmer Switch, Built-in Rotary ON/OFF and Knob Control Dimmer for Dimmable 3-100W LED/Incandescent/Halogen Bulbs
VIPMOON - If it is not, you can only turn on/off the lamp or the lamp flickers. Eyes protection: dim the lights 0% - 100% to let your eyes gradually adapt to bright light or darkness; reduce eyestrain and protect your eyes from overly bright lights.
Energy savings: works with max 50 watts of dimmable led bulbs or 100 Watts of Incandescent/Halogen Bulbs, Dimming range 0 — 100% to cut energy costs and extend bulb life.
Premium quality: excellent quality with overload protection, over current protection, over temperature protection and corresponds to the CE and ROHS safety standards. Note: before purchasing, you cannot use this dimmer for dimming, please confirm whether your LED light is marked as "dimmable".
Technical advantage: 220~240vac 3-100w inline trailing edge phase-cut dimmer, the dimming process is completely silent and will not make a buzzing sound! The lowest brightness can be preset, and the dimming range is 0-100%. Cannot be used for speed control of inductor and fans.
| Brand | VIPMOON |
| Manufacturer | VIPMOON |
| Height | 3.48 cm (1.37 Inches) |
| Length | 8.1 cm (3.19 Inches) |
| Width | 3.34 cm (1.31 Inches) |
| Part Number | 1 |
3. iolloi
Push On/Off Rotary Trailing-Edge dimmer for Dimmable LED/Incandescent/Halogen Bulbs, iolloi Inline LED Dimmer Switch 50W, Rewireable Cord Dimmer
iolloi - Risk-free shopping - iolloi promise to you! 30 days easy return! with 3 years warranty if the damage is not man-made. Please confirm whether your LED lamps are marked with “dimmable” before purchasing. Easy retrofit - size: 68 × 37 × 33 mm, connection via screw terminals, Don't solder iron welding terminals.
Energy savings - works with max 50 watts of dimmable led bulbs or 100 Watts of Incandescent/Halogen Bulbs, Dimming range 0 — 100% to cut energy costs and extend bulb life.
Optimal dimmability - noiseless and flicker-free when dimming, offers a uniform dimming range from 0% to 100%, iolloi trailing edge dimmer is perfect for dimmable LEDs and dimmable halogen lamps.
Security - meets all security requirements — excellent quality with overload protection, over current protection, over temperature protection and corresponds to the CE and ROHS safety standards. Warranty will not be provided in case of the following circumstances; such as self-repairs, damage caused by misuse, alternation, exposure to water, failure to comply with product manual.
| Brand | iolloi |
| Manufacturer | iolloi |
| Height | 3.25 cm (1.28 Inches) |
| Length | 6.76 cm (2.66 Inches) |
| Weight | 30 |
| Width | 3.71 cm (1.46 Inches) |
| Part Number | ID-CD01 |
| Warranty | 30 Days Hassle-Free Returns, 3-Year warranty (See Warranty Conditions) |
4. N\A
Inline Dimmer Switch Manual Knob Dimmer Switch Rotary Trailing Egde Dimmer for Lamps Lights 220V-240V
N\A - Rotary knob dimming: Built in rotary on/off and rotary knob dimming control, easy to use. Optimal dimming: noiseless and flicker-free when dimming, offers a uniform dimming range from 0% to 100%, trailing edge dimmer is perfect for LEDs and halogen lamps.
Please confirm whether your LED lamps are marked with "dimmable" before purchasing. Attention: when wiring, please check whether the input and output are short-circuited, otherwise it will cause the fuse to blow and damage the dimmer.
Wide application: suitable for led floor lamp, low voltage halogen lamp transformer, LED desk lamp, LED filament lamp, incandescent lamp, etc. Power supply voltage: 220V-240V. If not, you cannot use this dimmer for dimming, and can only be turned on/off. Specification: working temperature: -20 - 60 ℃.
| Brand | N\A |
| Manufacturer | N\A |
| Part Number | NSI2OE357-983FG23RU5429R |
5. ElekTek
In Line Rotary Dimmer Switch Rated 20-160w 240v AC 3 Core Suitable for Incandescent Lamps and Bulbs Black
ElekTek - With illuminated wheel and internal fuse. Not suitable for led bulbs. For use with 2 or 3 core flexes - earth terminal is present.
-. Please note: not suitable for led bulbs, 12v dc low voltage lighting or tranSFORMERS. Maximum load is 160 watts - loads greater than this will cause malfunction. Check your bulbs before ordering suitable for all 240v ac incandescent/halogen filament bulbs.
Not suitable for leds, 12v dc lighting or TRANSFORMERS. Minimum load is 20 watts - loads lower than this will cause malfunction. Rated for lamps 20-160 watts 220-240v ac, 50/60 hz - not suitABLE FOR LED BULBS.
| Brand | ElekTek |
| Manufacturer | ElekTek |
| Height | 2.8 cm (1.1 Inches) |
| Length | 9.6 cm (3.78 Inches) |
| Width | 3 cm (1.18 Inches) |
6. Mxfans
Mxfans White Inline 15-75W Manual Lights Knob Dimmer Switch for Lamps Lights
Mxfans - That carry power control lines. Suitable for all kinds of lamps, transformers, electrical appliances, etc. This product requires simple soldering by the buyer before it can be used normally.
Control the brightness of lights lighting. Connect it between the driver and the light and adjust the brighness with the manual knob.
7. Mxfans
Mxfans Black Inline 100W Manual Light Knob Dimmer Switch for Lamps Lights
Mxfans - Control the brightness of lights lighting. Connect it between the driver and the light and adjust the brighness with the manual knob.
This product requires simple soldering by the buyer before it can be used normally. Suitable for all kinds of lamps, electrical appliances, transformers, etc. That carry power control lines.
8. ElekTek
ElekTek LED Compatible Universal in Line Foot Dimmer Switch 240v AC 3 Core Suitable for Quality LED CFL & Incandescent Bulbs Black
ElekTek - Please note: not suitable for 12v lighting or transformers. Rated for incandescent lamps between a total output of 8-250 watts. Includes complete fitting instructions. For use with 2 or 3 core flex 075mm2 max - size: 100mm diameter 29mm high plus controls 100-240v AC, 50/60 Hz ONLY.
Dimming capability of certain bulbs can be dependent on the quality of manufacture, always use a recognised brand of dimmable bulbs. Rated for quality dimmable led lamps between a total output of 8-24 watts MAXIMUM 4 BULBS. Lamp can be switched off at favourite setting using the on/off button.
9. Lanyin
LanYing 2 Pcs Inline Switches,Torpedo Switch-AC 250V 10A,Inline Cord Switch,Movable Wiring Power Cord Dimmer,Table Lamp Switch for Small Appliance or Light Electrical CordConnect Neutral/Live RZ049
Lanyin - High-quality materialthe electric in-line switch is made of high-quality plastic, which has good anti-aging and heat resistance, good electrical conductivity, and black is dirt-resistant. Feed through switch with led indicator lightred indicator shows the on/off status, which can be lit with the status of the switch.
There are "n" and "L" marks on both ends of the inside. Neutral stands for "n" and LIVE stands for "L". 2 pcs torpedo switch specificationslamp switch have two levels, suitable for lighting products, and can be connected to two wires.
The rated voltage is 250V and the rated current is 10A. Size is 7. 2×1. 8×2. 7cm/2. 8×07×1in. Weight is 40g. Easy to installtwo-pole connection, and then cut the neutral wire and the live conductor to a certain length, pry out the grounding connector and wire it first, one-pole switching.
With reversible cable clamp and internal screw terminal, so that the installation is easier. Practical in-line switchre-wireable inline cord dimmer are used for compact, wall lamps and old toasters, bedrooms, homes, mirror lights, which are your old the perfect substitute for switches.
| Brand | Lanyin |
| Manufacturer | Lanyin |
| Height | 2.1 cm (0.83 Inches) |
| Length | 7.2 cm (2.83 Inches) |
| Width | 2.67 cm (1.05 Inches) |
| Part Number | 001 |
10. Mxfans
Mxfans Black Inline 150W 2A Manual Light Knob Dimmer Switch for Lamps Lights
Mxfans - Assembly method: welding. Connect it between the driver and the light and adjust the brighness with the manual knob. This product requires simple soldering by the buyer before it can be used normally.
Suitable for all kinds of lamps, transformers, electrical appliances, etc. That carry power control lines. Control the brightness of lights lighting.
N\A - With power control lines. Applicationsuitable for all kinds of lamps, transformers, electrical appliances, etc. Materialmade of high-quality flame-retardant materials, the internal high-quality circuit board is safe, reliable, and durable.
VIPMOON - If it is not, you can only turn on/off the lamp or the lamp flickers. Eyes protection: dim the lights 0% - 100% to let your eyes gradually adapt to bright light or darkness; reduce eyestrain and protect your eyes from overly bright lights.
iolloi - Risk-free shopping - iolloi promise to you! 30 days easy return! with 3 years warranty if the damage is not man-made. Please confirm whether your LED lamps are marked with “dimmable” before purchasing. Easy retrofit - size: 68 × 37 × 33 mm, connection via screw terminals, Don't solder iron welding terminals.
N\A - Rotary knob dimming: Built in rotary on/off and rotary knob dimming control, easy to use. Optimal dimming: noiseless and flicker-free when dimming, offers a uniform dimming range from 0% to 100%, trailing edge dimmer is perfect for LEDs and halogen lamps.
ElekTek - With illuminated wheel and internal fuse. Not suitable for led bulbs. For use with 2 or 3 core flexes - earth terminal is present.
Mxfans - That carry power control lines. Suitable for all kinds of lamps, transformers, electrical appliances, etc. This product requires simple soldering by the buyer before it can be used normally. Control the brightness of lights lighting. Connect it between the driver and the light and adjust the brighness with the manual knob.
Mxfans - Control the brightness of lights lighting. Connect it between the driver and the light and adjust the brighness with the manual knob. This product requires simple soldering by the buyer before it can be used normally. Suitable for all kinds of lamps, electrical appliances, transformers, etc. That carry power control lines.
ElekTek - Please note: not suitable for 12v lighting or transformers. Rated for incandescent lamps between a total output of 8-250 watts. Includes complete fitting instructions. For use with 2 or 3 core flex 075mm2 max - size: 100mm diameter 29mm high plus controls 100-240v AC, 50/60 Hz ONLY. Dimming capability of certain bulbs can be dependent on the quality of manufacture, always use a recognised brand of dimmable bulbs. Rated for quality dimmable led lamps between a total output of 8-24 watts MAXIMUM 4 BULBS. Lamp can be switched off at favourite setting using the on/off button.
Lanyin - High-quality materialthe electric in-line switch is made of high-quality plastic, which has good anti-aging and heat resistance, good electrical conductivity, and black is dirt-resistant. Feed through switch with led indicator lightred indicator shows the on/off status, which can be lit with the status of the switch.
Mxfans - Assembly method: welding. Connect it between the driver and the light and adjust the brighness with the manual knob. This product requires simple soldering by the buyer before it can be used normally. Suitable for all kinds of lamps, transformers, electrical appliances, etc. That carry power control lines. Control the brightness of lights lighting.
