As an Amazon Associate I earn from qualifying purchases.1. Mellbree
Mellbree Screwdriver Impact Drill Bit Holder Quick Release 60/100/150mm 1/4" Hex Shank Drill Bits Fit Bosch Makita Milwaukee Dewalt etc, Magnetic Drill Bit Holder Hex Shank 3 Pack Red
Mellbree - Very easy to change different hex shank to improve work efficiency. Press the knurled part for quick release. 100% guarantee: all mellbree products come with 12 months warranty, you are protected with our 100% No Questions Asked Guarantee for either a replacement or refund.
We care about only putting out high quality products that satisfy your needs. Durable material: chrome vanadium steel CR-V material, it has higher hardness, more durability, more wear resistance, after heat treatment, and longer service life.
Quick release: the built-in magnet will firmly hold the hexagonal handle, and the double safety will prevent it from falling off during operation.
1/4" hex shank: 60mm/100mm/150mm 6. 35mm hex shank magnetic drill bit holder perfect for drill, screwdriver, batch head and other to transfer. Universal compatibility: mellbree magnetic bit holder suitable for impact drive, etc. Used for extending all kinds of screwdriver bits, drill, batch head, electric drill, pneumatic drill, manual screwdriver, electric screwdriver, etc.
2. Makita
Makita B-35097 Impact Gold Ultra-Magnetic Torsion Insert Bit Holder
Makita - Xtreme torsion technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications.
2 piece design is engineered to allow the torsion technology to fully activate. High quality steel engineered for use with impact drivers. Designed exclusively for high torque impact drivers. Rare earth neodymium magnet is 2x stronger than magnets in standard insert bit holders.
| Brand | Makita |
| Manufacturer | Makita |
| Height | 1.7 cm (0.67 Inches) |
| Length | 4.76 cm (1.88 Inches) |
| Weight | 0.04 kg (0.09 Pounds) |
| Width | 17.15 cm (6.75 Inches) |
| Part Number | B-35097 |
| Model | B-35097 |
3. Saxton
Saxton Impact Duty Srewdriver Drill Driver Strong Magnetic Bit Holders 1/4 Inch Hex Shank Fit Bosch Makita Milwaukee Dewalt etc … 2
Saxton - Fitting: 1/4" hex drive - Length: 60mm. Very strong magnetic tip for secure grip. High quality Bit Holders. Suitable for standard and impact applications. Engineered steel and heat treatment for maximum strength and flexibility.
| Brand | Saxton |
| Manufacturer | Saxton Trading |
| Height | 7.62 cm (3 Inches) |
| Length | 17.78 cm (7 Inches) |
| Width | 12.7 cm (5 Inches) |
4. Saxton Blades
10 x Saxton PZ2 89mm Long Magnetic Impact Duty Screwdriver Drill Driver Bits for Dewalt Milwaukee Bosch Makita etc
Saxton Blades - Engineered steel and heat treatment for maximum strength and flexibility. Precision milled profile for optimum fit. 10pc saxton 89mm magnetic impact driver bits. Suitable for standard and impact applications. Professional quality Impact Driver Bits.
| Brand | Saxton Blades |
| Manufacturer | Saxton Trading Ltd |
| Height | 1 cm (0.39 Inches) |
| Length | 9 cm (3.54 Inches) |
| Width | 8 cm (3.15 Inches) |
| Part Number | SX10PZ2-89 |
| Model | SX10PZ2-89 |
5. Saxton Blades
10 x Saxton PZ2 152mm Long Magnetic Impact Duty Screwdriver Drill Driver Bits for Dewalt Milwaukee Bosch Makita etc
Saxton Blades - Engineered steel and heat treatment for maximum strength and flexibility. 10pc saxton 152mm magnetic impact driver bits. Suitable for standard and impact applications. Precision milled profile for optimum fit. Professional quality Impact Driver Bits.
6. Saxton
5X Saxton PZ2 89mm Long Magnetic Impact Duty Screwdriver Drill Driver Bits for Dewalt Milwaukee Bosch Makita etc
Saxton - Engineered steel and heat treatment for maximum strength and flexibility. Precision milled profile for optimum fit. Professional quality Impact Driver Bits. Suitable for standard and impact applications. 5pc saxton 89mm magnetic impact driver bits.
7. SabreCut
Makita, Bosch and Others, 4 Piece SabreCut SCRK1 Magnetic 60mm and 152mm Professional Impact Bit Holders with 2 x 32mm PZ2 Screwdriver Impact Bits Compatible with Dewalt, Milwaukee
SabreCut - 4 piece sabrecut revolution kit including powerlok 60mm and 152mm Magnetic Impact Bit Holder and 2 x 32mm Magnetic PZ2 Impact Bits with a Pouch. Impact bit holder designed for impact drivers and high-powered drill drivers.
Precision milled profile for optimum fit results in less cam out. Black oxide finish for corrosion resistance. C ring holds the bit securely. Tough heat-treated bits for improved durability and torsion zone for reduced breakage.
4 piece sabrecut revolution kit including powerlok 60mm and 152mm Magnetic Impact Bit Holder and 2 x 32mm Magnetic PZ2 Impact Bits with a Pouch. Rare earth magnet, High torque & pull force. Impact torsion screwdriver bits. Heat treated custom engineered steel for maximum strength and durability. Professional quality Impact Bit Holder and Impact Driver Bits supplied with a Pouch.
| Brand | SabreCut |
| Manufacturer | TopsTools |
| Height | 2 cm (0.79 Inches) |
| Length | 16 cm (6.3 Inches) |
| Weight | 0.11 kg (0.24 Pounds) |
| Width | 11 cm (4.33 Inches) |
| Part Number | SCRK1 |
8. Makita
Makita B-28597 Impact Gold 11 Piece Screwdriver bit Set, Blue
Makita - 75mm bit holder. Convenient one handed fastening. Sizes: 25mm ph1, t25, t20, pz2, pz3, pz1, ph3, ph2, t15, T30. High strength Tatara steel. Lasts up to 15 times longer than a standard screwdriver bit. 1/4" hex fitting.
| Brand | Makita |
| Manufacturer | Makita |
| Height | 15 cm (5.91 Inches) |
| Length | 15 cm (5.91 Inches) |
| Weight | 0.12 kg (0.26 Pounds) |
| Width | 3 cm (1.18 Inches) |
| Part Number | B-28597 |
| Model | B-28597 |
9. Makita
Makita E-11994 8 Piece Impact Black Screw Bit Set
Makita - Supplied in a plastic holder with a connecting keyring to hang on a belt. Exceptional durability and strength. Suitable for a wide range of screwdriving applications. Hex shank. Ph1, 2 x ph2, ph3, pz2, pz1, pz3. Lengthh 25mm. 60mm magnetic bit holder.
10. StealthMounts
StealthMounts Black Magnetic Bit Holders for Makita LXT Tools
StealthMounts - It will keep your bits together, organised and on your Impact Driver to avoid losing track of them. The perfect makita Bit organiser for your Makita Impact driver. Keep your bits on your tool: our makita bit holders comes in a pack of 2.
Satisfaction guaranteed: we at stealthmounts solely believe in 100% customer satisfaction. Simply install the makita bit holder using the provided hardware and keep your most common bits organised! Perfect makita bit organiser: our bit holder for makita Tools can be used with the Makita LXT.
Each makita magnetic drill bit holder can hold up to 5 bits allowing for quick access to your most common drill bits. These magnetic bit holders are injection moulded with ABS plastic and come with the proper hardware to install.
So, buy our Makita Bit Holders with confidence. Superior quality material: our makita bit holders are made in the United Kingdom. If in any case, you are unhappy with your purchase, then please let us know, we will do anything required to make you a happy customer. Makita bit holders: our makita magnetic bit holders are the perfect accessory for you Drill or Impact.
Mellbree - Very easy to change different hex shank to improve work efficiency. Press the knurled part for quick release. 100% guarantee: all mellbree products come with 12 months warranty, you are protected with our 100% No Questions Asked Guarantee for either a replacement or refund.
Saxton - Fitting: 1/4" hex drive - Length: 60mm. Very strong magnetic tip for secure grip. High quality Bit Holders. Suitable for standard and impact applications. Engineered steel and heat treatment for maximum strength and flexibility.
Saxton Blades - Engineered steel and heat treatment for maximum strength and flexibility. Precision milled profile for optimum fit. 10pc saxton 89mm magnetic impact driver bits. Suitable for standard and impact applications. Professional quality Impact Driver Bits.
Saxton Blades - Engineered steel and heat treatment for maximum strength and flexibility. 10pc saxton 152mm magnetic impact driver bits. Suitable for standard and impact applications. Precision milled profile for optimum fit. Professional quality Impact Driver Bits.
SabreCut - 4 piece sabrecut revolution kit including powerlok 60mm and 152mm Magnetic Impact Bit Holder and 2 x 32mm Magnetic PZ2 Impact Bits with a Pouch. Impact bit holder designed for impact drivers and high-powered drill drivers.
Makita - 75mm bit holder. Convenient one handed fastening. Sizes: 25mm ph1, t25, t20, pz2, pz3, pz1, ph3, ph2, t15, T30. High strength Tatara steel. Lasts up to 15 times longer than a standard screwdriver bit. 1/4" hex fitting.
Makita - Supplied in a plastic holder with a connecting keyring to hang on a belt. Exceptional durability and strength. Suitable for a wide range of screwdriving applications. Hex shank. Ph1, 2 x ph2, ph3, pz2, pz1, pz3. Lengthh 25mm. 60mm magnetic bit holder.
StealthMounts - It will keep your bits together, organised and on your Impact Driver to avoid losing track of them. The perfect makita Bit organiser for your Makita Impact driver. Keep your bits on your tool: our makita bit holders comes in a pack of 2.
