As an Amazon Associate I earn from qualifying purchases.1. YONICO
Yonico 31215-SC 1/4-Inch Dia. 2 Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank
YONICO - Up cut end mills are the best choice for most standard milling applications. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool.
The up cut direction can leave behind a minimally rough top surface edge. Cutting diameter: 1/4" cutting height: 1" shank diameter: 1/4" Overall Length: 2-1/2" Flutes: 2 Up-cut endmills direct woodchips up and away from the milling area leaving an unobstructed path for the endmill.
Polished to a mirror finish from a solid carbide rod for precision & accuracy. Best used for: standard milling, dadoing, and boring. For standard cnc milling and routing where material removal and efficiency is required. Bit breakage is less likely. For use on cnc, table mount and handheld routers.
| Brand | YONICO |
| Manufacturer | Yonico |
| Height | 0.64 cm (0.25 Inches) |
| Length | 6.35 cm (2.5 Inches) |
| Weight | 0.01 kg (0.02 Pounds) |
| Width | 0.64 cm (0.25 Inches) |
| Part Number | 31215-SC |
| Model | 31215-SC |
| Warranty | Limited lifetime warranty. |
2. SpeTool
SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver
SpeTool - Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Plunge Mortises, better than straight bits.
The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance.
3. Sinoprotools
Sinoprotools Spiral CNC Router Bits UpCut 1/4 inch Shank, 1/4” Cutting Diameter, 1” Cutting Length, 2-1/2” Total Length, HRC55 Solid Carbide CNC Mill Bits for Wood Carving Spiral Cutter
Sinoprotools - The cnc end mill upcut router bits apply to various wood: such as Plywood, and any hardwood working and Long service life for sharp. You can decrease the times of changing cutters, save production time.
End mill bits can smoothly upcut groove and slots, finish machining, end milling, Cycles and dados with clean edge and bottom, Mortises, better than straight bits. Spiral upcut bits used for side milling, etc. The cnc 1/4 upcut router bit suit for CNC router and any plunge routers with 1/4" collet.
The spiral 1/4 upcut cnc router bit made of solid carbide Tungsten steel, it is high-wearable and has a long life. And also for carbon steel, soft alloy steel, MDF, cast iron, OAK, tool steel, aluminum alloy. Size details of the cnc 1/4 upcut bit spiral router bits: 1/4 inch 6. 35mm shank, 1/4 inch 6. 35mm cutting diameter, 1 inch cutting length, 2-1/2 inch total length.
4. SpeTool
Carving, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter
SpeTool - Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. Industrial quality control to ensure best performance. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp.
The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
5. HFS
HFS R1/4-Inch Dia. 2 Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank
HFS - Wide application: cnc milling machine processing center, advertising CNC milling machine, woodworking, machinery, etc. Various cuttable materials: mdf, resin, composite board, log; Acrylic, melamine board; Solid wood, plastic, particle board, PVC, plywood;.
High precision grinding and polishing:: Carbide, high precision grinding and polishing, high wear resistance, good rigidity, heat resistance, and not easy to break;.
Superior edge grinding Technology: No wear, no smell, no smoke, no sound during operation. Size: tool handle diameter: 1/4in, cutting edge diameter: 1/4in, Cutting length: 1in; Total length: 2-1/2in;.
6. YONICO
Yonico 31011-SC 1/8-Inch Dia. O Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank
YONICO - Aluminum creates larger chips than most other materials and bits such as O-flute end mills are recommended for proper chip removal. O flute end mills allow for lots of chip clearance which is essential when milling aluminum.
Polished to a mirror finish from a solid carbide rod for precision & accuracy. For cnc milling and routing on aluminum and plastics where a clean bottom surface edge of material is required.
For use on cnc, table mount and handheld routers. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool. Best used for: aluminum cutting diameter: 1/8" cutting height: 1/2" shank diameter: 1/4" overall length: 2" Flutes: 1 This bit is specifically designed for milling aluminum.
| Brand | YONICO |
| Manufacturer | Yonico |
| Height | 0.64 cm (0.25 Inches) |
| Length | 5.08 cm (2 Inches) |
| Width | 0.33 cm (0.13 Inches) |
| Part Number | 31011-SC |
| Model | 31011-SC |
7. YONICO
Diameter: 1/4", Cutting Height: 1", Yonico 31010-SC, Low Helix Upcut Spiral End Mill CNC Router Bit, Flutes: 2-1/4" Shank
YONICO - Industrial Quality Router Bits. Satisfaction Guaranteed & Lifetime Warranty. Cutting diameter: 1/4" Cutting Length: 1". Premium quality Carbide Industrial CNC Router Bit. Shank diameter: 1/4" Overall Length: 2".
| Brand | YONICO |
| Manufacturer | Yonico |
| Height | 0.64 cm (0.25 Inches) |
| Length | 6.35 cm (2.5 Inches) |
| Weight | 0.04 kg (0.08 Pounds) |
| Width | 0.64 cm (0.25 Inches) |
| Part Number | 31010-SC |
| Model | 31010-SC |
8. YONICO
Yonico 14121 1/4-Inch Up-Cut Flush Trim Solid Carbide Spiral Router Bit 1/4-Inch Shank
YONICO - Flush trim all types of material for a perfect finish. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool.
The yonico 14121 solid carbide flush trim up cut router bit is designed to provide extra clean and smooth flush trim cuts. 1/4" shank. Made from extremely durable solid carbide, the Yonico 14121 is ideal for use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals.
For use on table mount and handheld router. Polished to a mirror finish from a solid carbide rod for precision & accuracy. The two independent ball bearing guides at the tip ensure smooth operation every time.
| Brand | YONICO |
| Manufacturer | Yonico |
| Height | 0.64 cm (0.25 Inches) |
| Length | 7.62 cm (3 Inches) |
| Width | 0.64 cm (0.25 Inches) |
| Part Number | 14121 |
| Model | 14121 |
9. Sinoprotools
Sinoprotools Upcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits, 1/4" Shank Up-Cut 1/4"X1/4"X1-1/8"X3"1 Bits Nano Coated Available
Sinoprotools - Wide range of use the 1/4 inch flush cut spiral router bit for use with soft & hard woods, composites, ply-woods, laminates, plastics and some non-ferrous metals. Sinoprotools warrantysinoprotools are committed to provide the best service for our customers on Amazon, we are take responsible to our items, if you have any problems please feel free to contact us, we will help you and provide you lifetime quality guarantee.
Perfect size trim router bitsthe flush trim Up-cut router bits - Shank: 1/4inch, Cut Length: 1-1/8 inch. Industrial quality router bitsthe flush trim router bits 1/4 shank made of Solid Carbide, with C3 Micro-grain Tungsten Carbide Cutters.
Industrial quality flush cut spiral router bits provide precise, efficient cuts and offers extreme durability. Up-cut spiral router bitsthe 1/4 router bit flush trim redesigned with permanent bearing retaining collar to reduce trimming mishaps.
10. YONICO
Yonico 31015-SC 1/4-Inch Diameter O Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank
YONICO - For use on cnc, table mount and handheld routers. For cnc milling and routing on aluminum and plastics where a clean bottom surface edge of material is required. This o-flute bit has a cutting diameter of 1/4", cutting height of 3/8", overall length 2" and 1/4" shank.
Polished to a mirror finish from a solid carbide rod for precision & accuracy. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool.
| Brand | YONICO |
| Manufacturer | Yonico |
| Height | 0.25 cm (0.1 Inches) |
| Length | 5.08 cm (2 Inches) |
| Weight | 0.02 kg (0.05 Pounds) |
| Width | 0.63 cm (0.25 Inches) |
| Part Number | 31015-SC |
| Model | 31015-SC |
SpeTool - Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Plunge Mortises, better than straight bits. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance.
Sinoprotools - The cnc end mill upcut router bits apply to various wood: such as Plywood, and any hardwood working and Long service life for sharp. You can decrease the times of changing cutters, save production time.
SpeTool - Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. Industrial quality control to ensure best performance. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
HFS - Wide application: cnc milling machine processing center, advertising CNC milling machine, woodworking, machinery, etc. Various cuttable materials: mdf, resin, composite board, log; Acrylic, melamine board; Solid wood, plastic, particle board, PVC, plywood;.
YONICO - Aluminum creates larger chips than most other materials and bits such as O-flute end mills are recommended for proper chip removal. O flute end mills allow for lots of chip clearance which is essential when milling aluminum.
YONICO - Industrial Quality Router Bits. Satisfaction Guaranteed & Lifetime Warranty. Cutting diameter: 1/4" Cutting Length: 1". Premium quality Carbide Industrial CNC Router Bit. Shank diameter: 1/4" Overall Length: 2".
Sinoprotools - Wide range of use the 1/4 inch flush cut spiral router bit for use with soft & hard woods, composites, ply-woods, laminates, plastics and some non-ferrous metals. Sinoprotools warrantysinoprotools are committed to provide the best service for our customers on Amazon, we are take responsible to our items, if you have any problems please feel free to contact us, we will help you and provide you lifetime quality guarantee.
