As an Amazon Associate I earn from qualifying purchases.1. Trend
Trend LOCK/JIG For Routing Face-Plate Recess and Mortise, Doorlock Installation Tool
Trend - Needed accessories: to rout the lock case mortice, a router with an 80mm plunge and fitted with a 30mm guide bush is required, along with a suitable 12mm diameter cutter with an overall length of 115mm to achieve the maximum mortice depth of 70mm.
Adjustable sizes: the set of 12 lock face plate and 4 lock case templates supplied are held in the Lock Jig with magnets for fast swapping, requiring just one router and cutter to do both the lock case mortice and the faceplate. Full instructions: a comprehensive laminated reference sheet with common lock model also offers a secondary chart on the reverse side for info relating to faceplate and lock case sizes to quickly select the correct templates and achieve perfect results.
Quick and secure: with its tool-free setup, the trend lock Jig is very fast to set to any door width from 34mm to 58mm wide; Full-length clamping plate ensures jig remains rock solid in use, secured with locking levers and twin clamping knobs.
Easy to use: each template is stamped to indicate the locks it can be used with; 4-lettered plates for lock cases and 12-numbered plates for the faceplates; Simplifying and speeding up the selection process as well as eliminating costly errors.
| Brand | Trend |
| Manufacturer | Trend |
| Height | 15.5 cm (6.1 Inches) |
| Length | 6.8 cm (2.68 Inches) |
| Weight | 4.5 kg (9.92 Pounds) |
| Width | 41.5 cm (16.34 Inches) |
| Part Number | LOCK/JIG |
| Model | D/STAND/A |
2. Trend
Trend ECL Euro Cylinder Lock Jig
Trend - Using a 12mm straight cutter and a 20mm guide bush, the jig routs a 16mm hole for the spindle bar and the lock cylinder barrel, with 1mm clearance around the barrel for a high class fit and finish. Long rotating stops set the jig to the edge of the door with a set of additional spacers supplied to move the jig furthe in from the edge, catering for locks with slightly different backsets, covering a wider range of locks.
Additional drilling positions for marking the handle lock plate at 40mm centres can be made with 2. 75mm diameter trend Snappy drill bit guide ensuring maximum value and performance.
Fast set ups are assured with the etched incremental markings on the template for the barrel and spindle ratios as well as the lock handle backset, with standard backsets of 44mm and 57mm catered for. The jig quickly sets to either side of the door, simply rotating the stops for repositioning on the other side for maximum productivity on single or batch work applications.
| Brand | Trend |
| Manufacturer | Trend |
| Height | 16.5 cm (6.5 Inches) |
| Length | 6.5 cm (2.56 Inches) |
| Width | 47 cm (18.5 Inches) |
| Part Number | ECL/JIG |
| Model | ECL/JIG |
3. VEVOR
VEVOR 6PCS Mortice Door Fitting Kit JIG1 Door Lock Mortiser Kit Lock Fitting Jig Door Lock Mortiser Kit with 3 Cutters 18 22 25mm
VEVOR - 3 cutters: cutters made of tungsten steel, higher quality over high-speed steel. A plastic suitcase is included for easy transport. Applicable door range: the lock mortising kit can be used on wooden and aluminum doors with thickness under 13.
5 cm 5. 3 inch. Bigger m10 series with no distortion. Suitable for installing hotel doors, security doors and door lock modifying. Accurate and fast: robust construction and precise manufacture.
6 pieces kit: this 6-piece door lock mortising kit involves 1 jig kit door lock motiser with 3 cutters, 2 allen keys and 1 spanner. Easy operation: applying vertical guides with height and depth stops, overrun cutting area will be avoided by using this tool set. Sizes: 18/22/25 mm 07/087/1 inch. Increases mortice cutting accuracy and speed.
| Brand | VEVOR |
| Manufacturer | VEVOR |
| Height | 9.91 cm (3.9 Inches) |
| Length | 46.99 cm (18.5 Inches) |
| Weight | 3.18 kg (7 Pounds) |
| Width | 22.1 cm (8.7 Inches) |
| Part Number | MorticerJ6JT |
4. IVhomeshop
JIG1 Door Lock Mortiser Kit 18mm 22mm 25mm Lock Fitting Jig Maintenance Set Woodworking Hole Saw Opener Installation Mortising Jig Tool
IVhomeshop - Jig to accurately cut mortices and faceplates using your power drill. Self centres and clamps onto the edge of the door， Vertical guides, height and depth stops to ensure you do not overrun the cut area.
Fast carbide cutters specially designed for a very clean cut. Can cut door hinges and also some strike plates and electric releases. Fast and accurate on doors from 30mm - 55mm thick. Supplied with 3 cwb cutters: 18, 22 and 25.
5. DUEBEL
DUEBEL Aluminum Alloy Door Hinge Jig Woodworking Hole Opener Slotting Locator Wooden Door Hinge Hole Guide Door Lock Jig for Door Lock Installation
DUEBEL - Any lock and hinge can be fitted in a matter of a few minutes, speeding up the task immensely when compared to traditional methods, and with minimal effort for maximum productivity and efficiency. Safe clamping, no damage to the facade: the clamping part adopts rubber anti-skid design to ensure that the surface of the wooden door will not be damaged.
The maximum opening is 18 cm, which is easy to adjust and use. The puncher with its own scale, convenient and accurate. Easy to usethe length and width positioning supports flexible adjustment in four directions, accurate positioning and fast slotting rate.
After grooving is completed, all corners are rounded and need to be repaired to a right angle before installation. Unique design + quality material = prolong service lifeduebel hinge drilling plate is equipped with a stainless steel threaded sleeve in screw hole, lightweight, which effectively protects the internal thread of fixture and prolongs the service life.
Functionduebel wooden door hinge hole opener is designed for wooden door hinge groove, lock body guide plate groove and other slotting applications. It is the choice of professional woodworkers. Tipsthe hinge drilling plate needs to be used with the trimming machine. Fast clamping & safe clampingno tools required, fast clamping: hand-tightened screws, fast clamping, efficient work. Maximum clamping: 6CM.
| Brand | DUEBEL |
| Manufacturer | DUEBEL |
| Height | 11 cm (4.33 Inches) |
| Length | 49.5 cm (19.49 Inches) |
| Weight | 1650 |
| Width | 22 cm (8.66 Inches) |
6. Trend
Trend C019AX1/4TC Craft Pro 1/4-in Shank Tungsten Carbide Straight Router Cutter Bit
Trend - Application: use on softwoods, hardwoods, MDF, plywood and chipboard. Tungsten carbide: each cutter has solid tungsten carbide cutting edges for increased performance and durability in solid timber and abrasive sheet materials including ply and MDF.
Dimensions: length - 71 mm overall with an extra-long 1/4-inch shank; Diameter - 12 mm; Cutting Length - 19 mm.
Safe practices: includes etched ‘K’ Mark indicator on the shank for correct insertion depth, ensuring safe working practices and correct operation. Excellent value: High quality router accessory with long lifespan and consistent performance.
| Brand | Trend |
| Manufacturer | Trend |
| Height | 0.91 cm (0.36 Inches) |
| Length | 5.03 cm (1.98 Inches) |
| Weight | 0.02 kg (0.05 Pounds) |
| Width | 10.52 cm (4.14 Inches) |
| Part Number | C019AX1/4TC |
| Model | LOCK/JIG/B |
7. Trend
Trend H/JIG/A Two Piece Professional Hinge Jig Kit For Doors & Frames
Trend - Simple and convenient: the two-piece jig quickly assembles with just two screws to become a single, rigid jig, with any previous hinge settings retained for further use once stowed away in its carry case at the end of the day.
Repeatable, the routed recesses are a perfect match every time, time saviNG RESULTS: The HINGE/JIG/A hinge can be a template for length and backset, so that once set, eliminating the time consuming method of marking up and transferring each position.
Hinge compatibility: hinges from 67mm to 127mm long with widths from 9. 5mm to 35mm can be used with the jig using the same swift and repeatable set up making it very adaptable across a range of applications.
Applications: can be used on doors with traditional two-hinge and three-hinge layouts, for internal and external doors as well as heavy fire doors, and doors in high traffic areas where a secondary top hinge is required. Maximises productivity: for fitting new doors into new frames or linings; Designed for all types including rebates and stops up to 25mm thick, covering domestic, commercial applications as a one stop solution.
| Brand | Trend |
| Manufacturer | Trend |
| Height | 9 cm (3.54 Inches) |
| Length | 139.2 cm (54.8 Inches) |
| Weight | 1.86 kg (4.1 Pounds) |
| Width | 13.5 cm (5.31 Inches) |
| Part Number | H/JIG/A |
| Model | DWS/CP8/FC Classic Pro |
| Warranty | No warrenty. |
8. Mophorn
Silver, Mortice Door Fitting Kit with 3pcs Tungsten Steel Cutters & Accessories,Mortising Jig Tool Hole Saw Door Opener, for Wooden Doors, Mophorn 6Pcs Door Lock Hole Opener Kit
Mophorn - Applicable door range - the lock mortising kit can be used on wooden and aluminum doors with thickness under 13. 5 cm 5. 3 inch. 3 cutters - cutters made of tungsten steel, higher quality over high-speed steel.
6 pieces kit - this 6-piece door lock mortising kit involves 1 jig kit door lock motiser with 3 cutters, 2 allen keys and 1 spanner. Increases mortice cutting accuracy and speed. Suitable for installing hotel doors, security doors and door lock modifying.
Sizes: 18/22/25 mm 07/087/1 inch. A plastic suitcase is included for easy transport. Accurate and fast - Robust construction and precise manufacture. Bigger m10 series with no distortion. Easy operation - applying vertical guides with height and depth stops, overrun cutting area will be avoided by using this tool set.
| Brand | Mophorn |
| Manufacturer | Mophorn |
| Height | 10 cm (3.94 Inches) |
| Length | 47 cm (18.5 Inches) |
| Weight | 3.63 kg (8 Pounds) |
| Width | 20 cm (7.87 Inches) |
| Part Number | 6-Piece Door Lock Hole Opener Kit |
| Model | 6PCS |
9. Trend
Trend PH M Pocket Hole Jig Mini
Trend - Compact design perfect for repair work in situ on furniture, cupboards, and cabinets. High quality all metal build quality for durability, solid performance and consistency in any project. Fully adjustable from 18mm to 54mm centres for twin holes or stripped down for single pockets; ideal for repairs or joints on thinner components.
Comes ready to use, complete with drill, driver bit and screws. Supplied with twin bases for use on new work and repairs for increased diversity.
| Brand | Trend |
| Manufacturer | Trend |
| Height | 9.3 cm (3.66 Inches) |
| Length | 13 cm (5.12 Inches) |
| Width | 25.1 cm (9.88 Inches) |
| Part Number | PH/JIG/M |
| Model | PH/JIG/M |
10. Trend
Easily help the router around a jig, Trend GB30 30mm Jig Router Guide Bush
Trend - Extended compatibility: direct fit to the Trend UniBase to allow other routers to use Trend guide bushes, achieving fast fitting and perfect concentricity to the spindle and cutter.
Precision work: essential for pinpoint accuracy when using jigs; Gives perfect concentricity between the cutter and jig. Must-have for any router: easily helps guide the router around a jig; The 30mm guide bush is ideal for use with Trend Trade Jigs and for general templating or jig work.
Short 6mm spigot length: ideal for user-made templates with thinner sheet material such as 6mm MDF, a material often favoured for such work. Compatibility: direct fit to the trend t4, the t10 or T11 routers with the inner plate adapter, T5 routers, and also for any Trend Base Configuration TBC routers.
| Brand | Trend |
| Manufacturer | Trend |
| Height | 0.7 cm (0.28 Inches) |
| Length | 14 cm (5.51 Inches) |
| Weight | 0.04 kg (0.09 Pounds) |
| Width | 7.7 cm (3.03 Inches) |
| Part Number | GB30 |
| Model | GB30 |
Trend - Needed accessories: to rout the lock case mortice, a router with an 80mm plunge and fitted with a 30mm guide bush is required, along with a suitable 12mm diameter cutter with an overall length of 115mm to achieve the maximum mortice depth of 70mm.
VEVOR - 3 cutters: cutters made of tungsten steel, higher quality over high-speed steel. A plastic suitcase is included for easy transport. Applicable door range: the lock mortising kit can be used on wooden and aluminum doors with thickness under 13.
IVhomeshop - Jig to accurately cut mortices and faceplates using your power drill. Self centres and clamps onto the edge of the door， Vertical guides, height and depth stops to ensure you do not overrun the cut area. Fast carbide cutters specially designed for a very clean cut. Can cut door hinges and also some strike plates and electric releases. Fast and accurate on doors from 30mm - 55mm thick. Supplied with 3 cwb cutters: 18, 22 and 25.
DUEBEL - Any lock and hinge can be fitted in a matter of a few minutes, speeding up the task immensely when compared to traditional methods, and with minimal effort for maximum productivity and efficiency. Safe clamping, no damage to the facade: the clamping part adopts rubber anti-skid design to ensure that the surface of the wooden door will not be damaged.
Trend - Application: use on softwoods, hardwoods, MDF, plywood and chipboard. Tungsten carbide: each cutter has solid tungsten carbide cutting edges for increased performance and durability in solid timber and abrasive sheet materials including ply and MDF.
Trend - Simple and convenient: the two-piece jig quickly assembles with just two screws to become a single, rigid jig, with any previous hinge settings retained for further use once stowed away in its carry case at the end of the day.
Mophorn - Applicable door range - the lock mortising kit can be used on wooden and aluminum doors with thickness under 13. 5 cm 5. 3 inch. 3 cutters - cutters made of tungsten steel, higher quality over high-speed steel.
Trend - Compact design perfect for repair work in situ on furniture, cupboards, and cabinets. High quality all metal build quality for durability, solid performance and consistency in any project. Fully adjustable from 18mm to 54mm centres for twin holes or stripped down for single pockets; ideal for repairs or joints on thinner components. Comes ready to use, complete with drill, driver bit and screws. Supplied with twin bases for use on new work and repairs for increased diversity.
Trend - Extended compatibility: direct fit to the Trend UniBase to allow other routers to use Trend guide bushes, achieving fast fitting and perfect concentricity to the spindle and cutter.
