As an Amazon Associate I earn from qualifying purchases.1. Hakko
T18-D24, Hakko Soldering Iron Tip Chisel 2.4mm x 14.5mm 2.4mm
Hakko - Requires slightly more skill than the standard ‘B’ series tips. T18 series soldering iron tip, ‘D’ chisel shape 2. 4mm x 14. 5mm. Shape d is also available for soldering at narrow pitches by placing the tip end in Line.
Suitable for use with the hakko fx-8801, FX-8803, FX-8805 Soldering Irons. This shape is capable of any soldering by placing the tip end in 2 ways: line and face.
Brand | Hakko |
Manufacturer | Hakko |
Height | 1.27 cm (0.5 Inches) |
Length | 4.57 cm (1.8 Inches) |
Weight | 0.01 kg (0.02 Pounds) |
Width | 1.27 cm (0.5 Inches) |
Part Number | T18-D24 |
Model | T18-D24 |
2. Hakko
Hakko FX-951 Soldering Station with a T15-D16 1.6mm Chisel Tip by Hakko
Hakko - Soldering iron fm-2027 uses quick-change composite tips - t15-d16 included free. Sleep mode functionality when used with the fh200-01 iron stand.
Low temperature alarm, auto shutoff after 30 minutes of non-use. Superior heat transfer and thermal recovery. Lockout key card to prevent unauthorized or accidental temp settings.
3. Hakko
Hakko T15-DL32 Tip Chisel 3.2 x 10mm for FM-2021/FM-2027/FM-203/FM-204/FM-205/FM-206/FX-951 by Hakko
Hakko - Industry leading thermal control. Higher temperature tolerances than previous T7 Series tip. Superior tip plating provides for long tip life. Fast time-to-temp and thermal recovery. Built-in patented heating element.
4. Hakko
Hakko Soldering Tip, T34-D32 Chisel 3.2mm
Hakko - Quality Japanese Design. Requires slightly more skill than the standard ‘B’ series tips. This shape is capable of any soldering by placing the tip end in 2 ways: line and face.
Suitable for use with the Hakko FX650 DASH. T34 series soldering iron tip, ‘d’ chisel shape 3. 2mm x 6. 5mm x 17mm. Shape d is also available for soldering at narrow pitches by placing the tip end in Line.
Brand | Hakko |
Manufacturer | HAKKO |
Height | 0.79 cm (0.31 Inches) |
Length | 18.39 cm (7.24 Inches) |
Width | 4.9 cm (1.93 Inches) |
Part Number | T34-D32 |
Model | T34-D32 |
5. Hakko
Hakko T15-D24 Soldering Iron Tip Chisel Shape 2.4mm x 4mm x 10mm for FM-2027 / FM-2028
Hakko - Requires slightly more skill than the standard ‘B’ series tips. This shape is capable of any soldering by placing the tip end in 2 ways: line and face. Shape d is also available for soldering at narrow pitches by placing the tip end in Line.
Suitable for use with the hakko fm-2027 and fm-2028 soldering irons, fx-951, FM-206, soldering iron Tip for the standard irons supplied with the Hakko FM-203, FX-952 Soldering Stations. T15 series soldering iron tip, ‘D’ chisel shape 2. 4mm x 4mm x 10mm.
Brand | Hakko |
Manufacturer | Hakko |
Height | 0.76 cm (0.3 Inches) |
Length | 14.99 cm (5.9 Inches) |
Weight | 0.01 kg (0.02 Pounds) |
Width | 0.76 cm (0.3 Inches) |
Part Number | FBA_T15-D24 |
Model | T15-D24 |