Top 7 Flat Faced Isolation Valve UK – Valves

As an Amazon Associate I earn from qualifying purchases.

1. MSL

Pack of 2, 15mm Flat Faced Isolation Service Valve

MSL - Please note that there are two types of isolating valve, this listing being for a service valve which has a compression fitting on one end to accept a pipe and the other end has a BSP female thread.

If your thread measures 1/2 Inch in diameter then you require the 1/4 Inch version of this product. The other male end flat faced to accept a 1/2 Inch BSP thread. If you requires a valve that will accept a pipe in each side then you will require an isolation valve. Important sizing note - most plumbing products are measured using bsp thread dimensions which measure 1/4 inch larger than that stated, therefore this 1/2 Inch BSP thread actually measures 3/4 Inch in diameter. One end to take a 15mm pipe using a 15mm compression fitting. This listing is for a pack of 2. Chrome plated Isolation Valve operated via a Screwdriver slot.
BrandMSL
ManufacturerMSL
Weight0.11 kg (0.24 Pounds)
Part NumberNavigator

2. MSL

Pack of 5, 15mm Flat Faced Isolation Service Valve

MSL - Chrome plated Isolation Valve operated via a Screwdriver slot. The other male end flat faced to accept a 1/2 Inch BSP thread. One end to take a 15mm pipe using a 15mm compression fitting.

Please note that there are two types of isolating valve, this listing being for a service valve which has a compression fitting on one end to accept a pipe and the other end has a BSP female thread. If your thread measures 1/2 Inch in diameter then you require the 1/4 Inch version of this product. This listing is for a pack of 5. Important sizing note - most plumbing products are measured using bsp thread dimensions which measure 1/4 inch larger than that stated, therefore this 1/2 Inch BSP thread actually measures 3/4 Inch in diameter. If you requires a valve that will accept a pipe in each side then you will require an isolation valve.
BrandMSL
ManufacturerMSL
Weight0.29 kg (0.64 Pounds)
Part NumberNavigator

3. MSL

15mm Flat Faced Isolation Service Valve

MSL - Please note that there are two types of isolating valve, this listing being for a service valve which has a compression fitting on one end to accept a pipe and the other end has a BSP female thread.

This listing is for a pack of 1. The other male end flat faced to accept a 1/2 Inch BSP thread. If you requires a valve that will accept a pipe in each side then you will require an isolation valve. Chrome plated Isolation Valve operated via a Screwdriver slot. If your thread measures 1/2 Inch in diameter then you require the 1/4 Inch version of this product. Important sizing note - most plumbing products are measured using bsp thread dimensions which measure 1/4 inch larger than that stated, therefore this 1/2 Inch BSP thread actually measures 3/4 Inch in diameter. One end to take a 15mm pipe using a 15mm compression fitting.
BrandMSL
ManufacturerMSL
Weight0.06 kg (0.13 Pounds)
Part NumberNavigator

4. Pipestation

Pipestation Bolofix 15mm X 1/2" Male Iron Flat Faced Isolating Valve for Tap Connector Flexi Pipes Pack of 2

Pipestation - Chrome bolofix 15mm x 1/2" male iron flat faced isolating valve is the ideal for use with both hot & cold water system for new fixings as well as for emergency repairs works.
BrandPipestation
ManufacturerAK
Part NumberAK109

5. AK

Flat FACE REDUCING BOLOFIX 15MM X 3/8" 12MM Male Iron Isolation Valve X 2 VLAVES

AK - Chrome reducing bolofix 15mm x 3/8" 12mm male iron flat faced reducing isolating valve is the ideal for use with both hot & cold water system for new fixings as well as for emergency repairs works.
BrandAK
ManufacturerAK
Height2.5 cm (0.98 Inches)
Length4 cm (1.57 Inches)
Weight0.11 kg (0.25 Pounds)
Width2.5 cm (0.98 Inches)

6. Hansvit

Hansvit K91210 European Flexible Tap Tail UK Adaptors Compression Fittings 15 mm x 3/8-inch BSP Standard Isolating Valve, Brass

Hansvit - Overall dimensions: height 29 mm x diameter 17 mm. Connects the 3/8-inch BSP thread into the tap tail. Connects the 15 mm brass shaft into a standard 15 mm compression fitting such as on an isolating valve.
BrandHansvit
ManufacturerGlassbasins Ltd
Height3 cm (1.18 Inches)
Length2 cm (0.79 Inches)
Weight0.04 kg (0.08 Pounds)
Width2 cm (0.79 Inches)
Part NumberK91210
ModelK91210

7. Plumb Pak

Pack of 2, Plumb Pak Compression Isolator Valve 15mm Chrome

Plumb Pak - Package dimensions: 2. 0 l x 12. 2 h x 6. 2 w centimeters. Item package quantity: 1. 0 Chrome finish. Model number: pfC16-2AMZ.
BrandPlumb Pak
ManufacturerRobimatic
Part NumberVDTAZI012A
ModelPFC16-2AMZ