Top 7 Holesaw Pilot Drill Bit UK – Hole Saws

As an Amazon Associate I earn from qualifying purchases.

1. Faithfull

Faithfull HSPDHSS90 TCT Holesaw Pilot Drill

Faithfull - Made of high speed steel material for durability and strength. Suitable for use with faithfull and most other holesaw arbors requiring the use of a 6. 5mm pilot drill. Fits the following arbors: 16-30mm, 32-150mm, 16-30mm. Designed primarily for use with the TCT range of holesaws. Can be used in conjunction with TCT holesaws when cutting wood, man made boards and laminates.
BrandFaithfull
ManufacturerFaithfull
Height16 cm (6.3 Inches)
Length1 cm (0.39 Inches)
Weight0.04 kg (0.09 Pounds)
Width5 cm (1.97 Inches)
Part NumberHSPDHSS90
ModelHSPDHSS90

2. Xpork

Xpork Hole Saw 60mm M42 Bi-Metal Holesaw Cut Arbor Pilot Drill Bit Wood Plastic w/Rod Red

Xpork - Blade diameter:6mm. Shank Diameter:10mm. Diameter of thread:15mm. Cutting hole depth:38mm. Teeth stay sharper and make smoother cuts. M42 bi-metal hole saw holesaw cut arbor pilot Drill Bit for Aluminum, Stainless Steel, Steel, Iron, Wood and Plastic.
BrandXpork
ManufacturerXD
Part Number[email protected](UA4

3. Bosch

Accessories Drill Drivers, Bosch 1x HSS-Co Pilot Drill Bit Ø 7.15 mm

Bosch - Hole saw Guidance. Pilot bit cuts holes through a wide variety of materials. Hexagon Shank. Scope of delivery: 1x bosch hss-co pilot Drill Bit, Ø 7. 15 mm, total length 80 mm. Pilot drill bit drills the pilot hole in order to guide the hole saw into position.
BrandBosch
ManufacturerBosch
Height0.9 cm (0.35 Inches)
Length14.3 cm (5.63 Inches)
Weight0.02 kg (0.04 Pounds)
Width4.4 cm (1.73 Inches)
Part Number2608584677
Model2608584677

4. Bosch

Bosch 2608584843 HSS-Co Pilot Drill Bit, 120mm, Silver/Brown

Bosch - Hss-co pilot drill bit for holesaws. 135° point angle and split point. With cutting capacity 60 mm. 1/4" hex shank. Color: Silver/Brown.
BrandBosch
ManufacturerBosch
Height0.71 cm (0.28 Inches)
Length20.19 cm (7.95 Inches)
Weight0.02 kg (0.04 Pounds)
Width3.3 cm (1.3 Inches)
Part Number2608584843
Model2608584843

5. Nachar

TCT Hole Saw Kit, Hole Cutter Drill Bits with Titanium-plated pilot drill bit, Hole Saw for Metal Steel Plastic Iron Wood, 20mm Tungsten Carbide Teeth Hole Saw

Nachar - Multi function - designed to install on the hand-held electric drills, electromagnetic drills, bench drills, pneumatic drills and other rotating machinery to saw hole on the metal material. High performance - the drill bit is shrill enough to drill a new hole with minimal effort without chips or breakout, energy-saving and time-saving.

Provide uniform force and smooth punching without burrs, uneasy to break with low-noise working. Please add coolant or water when processing stainless steel and steel metal plates above 5mm. Exquisite workmanship - his tct hole saw designed with efficient three-blade, including outer blade, middle blade and inner blade. Widely use - tct bit kits great to cut metal material within 25mm thickness accurately and quickly, section steel, aluminum alloy, castings, such as stainless steel, iron, copper and other hard alloys.

Be attention to keep the drill running smoothly at a low speed, or pre-drill the center hole to extend the life of the cutter. Tungsten carbide cemented alloy-made cutter has been quenched at high temperature process to achieve good hardness and improve the efficiency of hole opening. Premium material - drill bit set hole made of superior m35 high-speed steel with plated titanium material, accurate positioning, the center drill is sharp and wear-resistant, high temperature resistance.
BrandNachar
ManufacturerNachar
Height2 cm (0.79 Inches)
Length10 cm (3.94 Inches)
Weight0.12 kg (0.26 Pounds)
Width2 cm (0.79 Inches)
Part NumberK16WWI2Q0720I1ORDJEHAJ

6. TOLSEN

11pcs Hole Saw Pilot Drill Bit Kits for Plywood Drywall Wood Plastic

TOLSEN - Can be used for drilling thru drywall, MDF, plastic, thin aluminium and plywood. Set includes a storage case. Cuts smooth, clean and accurate holes. Hole saw sizes: 3/4" - 19mm, 1 1/8"-28mm, 1 1/2"-38mm, 1 1/3"- 44mm, 7/8"- 22mm, 2"- 51mm, 1 1/4"- 32mm, 2 1/2"- 64mm.
BrandTOLSEN
ManufacturerTOLSEN
Height5 cm (1.97 Inches)
Length19.99 cm (7.87 Inches)
Weight0.11 kg (0.24 Pounds)
Width11 cm (4.33 Inches)
Part Number75865
Model75865

7. sourcing map

Sourcing map Diamond Drill Bit 95mm Glass Hole Saw Core Drill Bit with Center Pilot Bit for Glass Ceramics Porcelain Tile

sourcing map - The pilot bit in the center helps for cutting accurate holes. Sharp & smooth cut: diamond hole saw creates high precision, smooth cuts with no broken edges. Tips: please use at low drill speeds and drill pressure.

Not suited for use on concrete or for depths beyond about 1/2". Makes drilling process easier. Suitable for stone, Glass, Ceramics, Tiles, etc Processing. Not suitable for drilling tempered glass, plastic and wood. Specification: size: 95mm / 3. 74". Long life: reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life. Always work with coolant water when drilling. White zinc plating on the bits maximizes tool’s life with great resistance to corrosion. Clearance hole: diamond drill bits along with clearance hole facilitate the entrance of cooling water and escape of chips from drilling.
Brandsourcing map
Manufacturersourcing map
Part Numbera19121700ux0945