Top 9 Bed Slats Wooden UK – Home & Kitchen

As an Amazon Associate I earn from qualifying purchases.

1. goodbabycare

Adjustable Height Center Support Leg for Bed Frame,Extra Durable Steel Furniture Foot,Support System for Wooden Slats and Mattresses,Bed and Sofa Furniture Cabinet Foot Legs 2pcs7.08"-13.3" 7.08

goodbabycare - Hardware included: 2pcs height adjustable from 7. 08" to 13. 38" adjustable height Center Support Leg, 4pcs 2. 48"screw2pcs supplementary plate. Improve the quality of your sleep: if you think that a sagging mattress would not affect your sleep, without proper center support, causing them to slide or even worse, squeak while youre trying to sleep! What is more, the weight of the mattress will bow or crack the wooden slats, the uneven feel of the mattress itself can significantly affect your spine, you might want to think again! In fact, causing serious discomfort during both sleep and waking hours.

The unibody is meant to attach to the slats of your current bed frame in order to prevent sagging, bowing, protecting your bed and mattress from sagging and damage. International products have separate terms, including fit, age ratings, and language of product, are sold from abroad and may differ from local products, labeling or instructions.

Note: this product only has support legs, or cracking. No need to down grade your mattress or give up the bed frame you love. No extra trips to the Hardware Store. Made form aluminum alloy material, anti-corrosive and will not rust, we have thickened the pipe wall to make it more load-bearing; Leg bottom PVC pad are non-slip and wear resistant. Stronger: unibody construction allows you to add essential support to wooden slats or bed frame, shown in picture to only demonstrate where to attach.
Length17.98 cm (7.08 Inches)
Weight0.9 kg (1.98 Pounds)


SAAQZ Bed Legs Furniture Legs Adjustable150mm, Used On Wooden Bed Frames,slats Bed Or Sofa Middle Support LegsSize:150mm150mm-275mm, Frame Feet Support Holders,bed Frame Accessories

SAAQZ - Adjustable universal centre rail support for wooden bed bases and frames. Two-hole installation: the bed frame has two holes, directly align the feet with the two holes, put in the screws to adjust the distance, and tighten it. Two heights of the shelf bracket available: 1 15 cm to 27. 5 cm, 2 18 cm to 33 cm. This centre support leg works well with any wooden centre rails. Sturdy metal support replace plastic legs came with the bed.
Part NumberSAAQZ6541

3. The Bed Slats Company

53mm Single Bed Slat Holders Caps for Wooden Frames Beige Pack of 10

The Bed Slats Company - Suitable for use with 53mm Sprung Bed Slats. In stock & Ready to Ship. 53mm bed slat holders for Wooden Bed Frames. Each pack contains 10 Holders.
BrandThe Bed Slats Company
ManufacturerThe Bed Slats Company

4. Fhome

2 Pack Adjustable Height Center Support Leg for Bed Frame,Bed Center Slat Heavy Support Leg,Extra Durable Steel Support Legs For Replacement Feet of Bed Frame,Bed Center Slats,Cabinet,Wooden Furniture

Fhome - Each leg can carry a maximum weight of 600 pounds, which is twice that of other brands. Super-heavy carbon steel round base + Rubber round antislip cushion bottom design won't be harm and scratches to your floors and it has better grip.

Included hardware with each support leg,1 extend the screw ,1 Wing Nut ,2 Jam Nut,Coupler Nut,4 Phillips Wood Screw. Packing included:installation instruction. Stronger load: the super-heavy carbon steel circular base of the supporting feet is larger and more stable than other brands, and the weight is more than three times that of other brands. More stable: the support leg is included two Jam Nuts to lock and stabilize extender,it will be more stable than other brands with one more Jam Nut.

Material:the galvanized material is better and not easy to rust. Height adjustable: adjusts from 7. 2″ to 14. 8″, the support leg is suitable for bed frame, bed center slat and other wooden furniture. It can protect your bed and mattress from damage or sagging.

5. Reti Gritti

68x8 wooden slat caps for bed 6 pieces

Reti Gritti - Included in this package you will find 6 plastic slats to the base. The plastic can hold slats measuring 68x8 mm. Length of fixing pegs to the net: 20 mm. Distance between the fixing pegs to the net: 40 mm. Diameter of fixing pegs to the net: 8 mm. Slatted size that can be contained: 68x8 mm.
BrandReti Gritti
ManufacturerReti Gritti
Height5 cm (1.97 Inches)
Length5 cm (1.97 Inches)
Weight0.5 kg (1.1 Pounds)
Width5 cm (1.97 Inches)
Part NumberPL68S8MN


Bed Adjustable Legs, Metal Furniture Support Legs Foot Retractable Heavy Duty Bed Center Frame Slat Support Leg,Suitable for Cabinet Sofa Bed Frame Replacement Parts 2 Pcs(7inch -13inch Black

KRIZJUES - Height adjustable: adjustable sofa legs feet can adjust the distance from 7inch to 13inch. Make the bed more reliable without making noise. Brand: krizJUES. You can adjust your comfortable height.

Balance the bed frame: sleep on the bed for a long time. Compression of the mattress will deform and bend the bed frame. The bottom is made of non-slip and scratch-resistant nylon. Material: furniture adjustable legs surface adopts high-strength high-quality stainless steel. Prevent breakage: center support leg for bed sturdy and durable. Thereby improving high-quality sleep.

And there will be no signs of scratching on the ground. Combine the two. Can strengthen the stability of the bed. The bed will be stable and will not shake. This will pose a health threat to the cervical spine. Installed under the bed. Easy to install: the adjustable center support leg is free of punching procedures. Thereby improving the quality of sleep.
Height0 cm (0 Inches)
Length18 cm (7.09 Inches)
Width11 cm (4.33 Inches)
Part Number0

7. Kings Brand Furniture

Adjustable Height Center Support Leg for Bed Frame, Kings Brand Furniture

Kings Brand Furniture - Packaged with center leg support, extender, screws and instructions. Material: metal/Plastic. Kings brand furniture - Adjustable Height Center Support Leg for Bed Frame. Easy to install. Adjusts from 7. 25″ to 14″. The strong metal construction adds durable support to your bed’s wooden slats, while the nylon bottom prevents floor scuffs. Dimensions: 2" w x 3" d x 7"/14" H.
BrandKings Brand Furniture
ManufacturerKings Brand Furniture
Height6.86 cm (2.7 Inches)
Length16.51 cm (6.5 Inches)
Width12.19 cm (4.8 Inches)
Part NumberB1305


2Pcs Adjustable Height Center Support Leg for Bed Frame, Extra Durable Steel Furniture Foot | Suitable for Bed Frame Sofa Furniture Cabine Foot Legs 7.08"-13.3", Bed Center Slat Heavy Support Leg

FHOME - When the bed frame has no holes, clamp the bed frame, put in the screws to adjust the distance, directly use the bracket to align the double holes and put the screws to adjust the distance, no punching, place the counter-piece on the corresponding bracket on the bed frame, use the feet and the bed frame to place it in a crisscross style, easy to install.

Hardware included: 2pcs height adjustable from 7. 08" to 13. 38" adjustable height Center Support Leg, 4pcs 2. 48"screw,2pcs supplementary plate. No extra trips to the Hardware Store. When the bed frame has holes, and tighten it. Material: made form high quality steel, electrophoresis black to prevent rust and corrosion, ensuring a long life and preventing damage to your bed. If you find the product is damaged or missing parts, please contact us for a free replacement.

The design is a cost effective way for maintaining the life of your expensive bedbase / Wooden Slat / Mattress Foundation / Platform Bed Frame / Box Spring . The bed frame support legs will hold and evenly distribute the weight of your heavy mattress efficiently protecting your bed and mattress from sagging and damage. Saving you money on bed repairs and mattress replacements. Function:its adjustable-height(adjusts from 7. 08″ to 13.

9. Warmery

Adjustable Furniture Legs Feet 8.6 inch Metal Adjustable Height Bed Rail Support Legs Wooden Bed Frame Support Replacements Center Frame Slat Support Leg for Sofa Furniture Cabinet Couch Chair Ottoman

Warmery - Size: the height is 8. 6in. Black appearance: suitable for various furniture styles such as most bed frames, bed chair, sofa furniture cabinet, table, bed center slat, shelves and other furniture. Package content: 2 pcs adjustable bed furniture leg, 4pcs mounting screws, 4 pcs nuts and 2pcs auxiliary plate.

Just rotate it and adjust it to the suitable height for your furniture. Compatible with American-made furniture. Use for bed: lf the bed frame has holes, align the double holes with the bracket and tighten the screw. The adjustable range is 09in, from 8. 6" to 9. 5". Please check the package after you receive it. Premium material: made of thickened 3mm stainless steel pipe wall, each bed frame leg can withstand 100kg.

To hold the weight of your mattress protecting your bed and mattress from sagging and damage. If you find that the product is damaged or missing parts, please contact us in time to provide you with replacement services. Please check the size before buying. The bottom is made of strong pvc, stable, anti-corrosive and anti-rust, non-slip, wear-resistant, with no noise and will not damage or scratch your floor.
Height8.51 cm (3.35 Inches)
Length14.99 cm (5.9 Inches)
Width22.48 cm (8.85 Inches)
Part NumberWY-US100001