As an Amazon Associate I earn from qualifying purchases.1. QOTSTEOS
Hole Saw Dust Bowl, Saw Dust Catcher for 0.63-4.92inch Hole Openers, Ash Bowl Drill Dust Cover Easy Operate Hole Saw Accessories, Elastic Sealing Drill Dust Collector
QOTSTEOS - No ceiling marks: you don’t have to worry about damaging ceilings or wall materials when using this drillers dust bowl that collapses like a plunger when sealing to the surface.
Wide range of applications: moderate size, suitable for 16mm/063 inch-125mm/4. 92 hole openers. Wide range of applications: moderate size, suitable for 16mm/063 inch-125mm/4. 92 hole openers. Minimize messes: when you have this drillers dust bowl on hand at your commercial, residential or industrial worksite, you can minimize messes as the bowl collects saw dust and messes while drilling large diameter holes.
The drillers dust bowl forms a seal to the surface of the material and allows you to encapsulate all debris. Simple attachment: easily attach this saw dust collector that fits seamlessly between cutting tools and the drill’s chuck. The best part is that it does not leave ceiling marks.
| Brand | QOTSTEOS |
| Manufacturer | QOTSTEOS |
| Height | 1.7 cm (0.67 Inches) |
| Length | 12 cm (4.72 Inches) |
| Width | 12 cm (4.72 Inches) |
| Part Number | 16202047029582 |
2. Starrett
Starrett DB2 Debris Collector
Starrett - Suitable for holesaws up to and including 121mm 4. 3/4". Huge time saving potential - no clean up, no debris spread, no drill damage. Suitable for tct fast cutting multi Purpose and Bi-Metal Hole Saws up to and including 121mm.
The flange of the cowl then forms a seal against the material being cut, collecting all dirt and debris inside the cowl. Avoid the health and safety concerns of airborne dust. Easy to Use.
3. DADE
DADE Drill Dust Collector Eliminator D.A.D.E Holesaw Drilling Vertically Ceiling
DADE - 15mm hole for Drill Bit. Ideal for downlighter installation and ceiling fixings. Reduces hours spent on cleaning up. Reduces exposure to airborne debris whilst drilling. Self levels on drill to enable one-handed operation.
4. AUTUUCKEE
Hole Saw Accessories Dust Bowl, AUTUUCKEE Drill Dust Collector, Electric Drill Dust Cover Ash Bowl, Glass Hole Saws, Durable Simple Sealing for 16mm-125mm Bimetal Hole Saws
AUTUUCKEE - Simple tools can help you have better when you are working with a hammer drill. Stable: threaded occlusion, embedded bearing, simple assembly and disassembly, and can be attached to the wall. Easy to install and clean: silicone.
Suitable for: bimetal hole saws, glass hole saws and other hole saws whose handle diameter does not exceed 10mm/039 inches and the handle length exceeds 20mm/079 inches.
The best part is that it does not leave ceiling marks. Protect your health from dust. Simple& fast operationo: attaches quickly and easily for added user convenience. No ceiling mark-s: you don’t have to worry about damaging ceilings or wall materials when using this drillers dust bowl that collapses like a plunger when sealing to the surface.
Moderate size, suitable for 16mm/063 inch-125mm/4. 92 hole openers. Electric hammer dustproof cover can effectively prevent dust diffusion and inhalation into the lungs. Easy to install and clean, just one minute to complete the installation.
| Brand | AUTUUCKEE |
| Manufacturer | AUTUUCKEE |
| Height | 1.1 cm (0.43 Inches) |
| Length | 16 cm (6.3 Inches) |
| Weight | 0.13 kg (0.29 Pounds) |
| Width | 16 cm (6.3 Inches) |
| Part Number | 16218474437516 |
5. POHOVE
POHOVE Drill Dust Collector Hole Saw Dust Bowl Drill Ash Bowl Drywall Dust Collector Shockproof Dust Catcher Hole Saw Dust Catcher for 0.63-4.92inch Hole Openers
POHOVE - The drillers dust bowl forms a seal to the surface of the material and allows you to encapsulate all debris. Suitable for: bimetal hole saws, glass hole saws and other hole saws whose handle diameter does not exceed 10mm/039 inches and the handle length exceeds 20mm/079 inches.
Simple attachment: easily attach this saw dust collector that fits seamlessly between cutting tools and the drill’s chuck. No ceiling mark-s: you don’t have to worry about damaging ceilings or wall materials when using this drillers dust bowl that collapses like a plunger when sealing to the surface.
Interior tool: eliminat e the need to vacuum or even don face mas-k-s and goggles when you can use this drillers dust bowl that collects saw dust when installing recessed lighting fixtures.
The best part is that it does not leave ceiling mark-s. Minimize messes: when you have this drillers dust bowl on hand at your commercial, residential or industrial worksite, you can minimize messes as the bowl collects saw dust and messes while drilling large diameter holes.
| Brand | POHOVE |
| Manufacturer | POHOVE |
| Height | 1.5 cm (0.59 Inches) |
| Length | 12 cm (4.72 Inches) |
| Weight | 0.11 kg (0.24 Pounds) |
| Width | 12 cm (4.72 Inches) |
| Part Number | 16196048039780 |
6. DASNTERED
Drill Dust Cover, Drill Dust Collector Hole Saw Accessories Home Ash Bowl Drill Dust Cover Easy Operate Hole Saw Accessories Elastic Sealing
DASNTERED - Wide range of applications: moderate size, suitable for 16mm/063 inch-125mm/4. 92 hole openers. Size: about inner diameter: 125mm/4. 92 inches, height: 70mm/2.
76 inches, hole diameter: 10mm/039 inches. Suitable for: bimetal hole saws, glass hole saws and other hole saws whose handle diameter does not exceed 10mm/039 inches and the handle length exceeds 20mm/079 inches.
Note: only the dust cover is included, and the hole opener is not included. Elastic: transparent and elastic, it can be close to the wall when used, effectively preventing dust from spreading everywhere. Stable: threaded occlusion, simple assembly and disassembly, embedded bearing, and can be attached to the wall.
| Brand | DASNTERED |
| Manufacturer | DASNTERED |
| Height | 1.1 cm (0.43 Inches) |
| Length | 12 cm (4.72 Inches) |
| Weight | 0.11 kg (0.24 Pounds) |
| Width | 12 cm (4.72 Inches) |
| Part Number | 16202703468311 |
7. HERZO
HERZO Dust Extraction Cutting Guard for 115/125mm Angle Grinder
HERZO - Protective guard with cutting guides. Suitable for bosch, kress, dewalt, makita, Milwaukee Etc 80% Main Brand 115/125MM Angle Grinder.
Protective guard with cutting guides for 115/125mm angle grinder. Sutiable for 48-51mm Angle grinder front cap. Suction hood with clamp fitting, 4 pcs clamping washer thickness 1. 5-5. 5mm.
| Brand | HERZO |
| Manufacturer | Herzo |
| Height | 0.66 cm (0.26 Inches) |
| Length | 1.85 cm (0.73 Inches) |
| Weight | 0.46 kg (1.01 Pounds) |
| Width | 0.61 cm (0.24 Inches) |
| Part Number | NECALON |
8. Brüder Mannesmann Werkzeug
Brüder Mannesmann Werkzeug 1977026 Brueder Mannesmann M12498 Dust Catcher
Brüder Mannesmann Werkzeug - Dust catcher. For attaching to masonry drill bits. Country of origin is China. Model number: M12498.
9. Silverline
Silverline 868744 Drill Dust Collector 4, 10 mm
Silverline - Twist-off lid. 4 - 10mm. Collects debris and dust. Integral brush fibres hold dust collector in position.
| Brand | Silverline |
| Manufacturer | SLTL4 |
| Height | 22 cm (8.66 Inches) |
| Length | 46.5 cm (18.31 Inches) |
| Weight | 0.03 kg (0.08 Pounds) |
| Width | 14 cm (5.51 Inches) |
| Part Number | 868744 |
| Model | 868744 |
QOTSTEOS - No ceiling marks: you don’t have to worry about damaging ceilings or wall materials when using this drillers dust bowl that collapses like a plunger when sealing to the surface.
Starrett - Suitable for holesaws up to and including 121mm 4. 3/4". Huge time saving potential - no clean up, no debris spread, no drill damage. Suitable for tct fast cutting multi Purpose and Bi-Metal Hole Saws up to and including 121mm. The flange of the cowl then forms a seal against the material being cut, collecting all dirt and debris inside the cowl. Avoid the health and safety concerns of airborne dust. Easy to Use.
DADE - 15mm hole for Drill Bit. Ideal for downlighter installation and ceiling fixings. Reduces hours spent on cleaning up. Reduces exposure to airborne debris whilst drilling. Self levels on drill to enable one-handed operation.
HERZO - Protective guard with cutting guides. Suitable for bosch, kress, dewalt, makita, Milwaukee Etc 80% Main Brand 115/125MM Angle Grinder. Protective guard with cutting guides for 115/125mm angle grinder. Sutiable for 48-51mm Angle grinder front cap. Suction hood with clamp fitting, 4 pcs clamping washer thickness 1. 5-5. 5mm.
