As an Amazon Associate I earn from qualifying purchases.
Yoshome CO2 Glass Laser Tube Lamp 40W 730mm/50W 820mm/60W 1260mm Length, 50mm Dia for Laser Engraver Cutting Machine UK Stock 40W 730mmYoshome
- Application: pen engraving, stamp engraving, artware engraving, wood&bamboo engraving, toy cut, plastic engraving. Laser tube life hours: 3000-4500hours According to the water temperature, continuous workload, the use of laser intensity and other aspects to determine.
The catalyst plated in the discharge tube coordinates unique electrode treatment technique to make discharge more stably.
The tube body is made of glass containing high borosilicate, heat resistance is strong, not easy to deform, the tube body is hard, and it is not easy to crack at high temperature. This laser tube has higher power rate and longer service time, compared with the laser tube of similar length.
Cloudray Reci W4 100-130W CO2 Laser Tube Wooden Case Box Packing Dia. 80mm L1400mm for CO2 Laser Engraving Cutting MachineCloudray
- Higher power rate compared with the laser tube of similar length and longer service time, which is suitable for laser marking, laser cutting and laser engraving. Mark & model: w4, 100-130w l: 1400mm dia.
80mm，the product is featured as small size and good model. Replacement parts for laser marking, laser cutting and laser engraving machine. Expedited shipping with wooden Box Packing, 10000 hours lifespan, 10 months warranty. Better performance, more stabilty & higher efficiency.
CO2 Glass Laser Engraver Tube High Quality 40W 50W 60W Sealed for Laser Engraving and Cutting Machine 50W 820mmwowsubli
- It is excellent in laser spot mode, wood, leather, engraving, has a long service life and has strong laser energy. Unique glass metal sealing technology. The catalyst plated in the discharge tube coordinates unique electrode treatment technique to make discharge more stably.
Adjustable resonator, good beam quality. High-quality, reliable and long life. The laser tube is the core component light, cloth, bamboo, and can be carved and cut acrylic, etc.
OMTech 60W High Power Laser Tube for CO2 Laser Engraver Cutter Marking Machines 4500hr Hard Borosilicate Glass 1000mm Length 50mm Diameter TubeOMTech
- Installs in minutes, lasts for years: preinstalled connection wires allow easy hook-up, while Orion Motor Tech's strong warranty and friendly customer service ensure you'll enjoy the laser's full 4500-hour service life. Specifications: this borosilicate glass laser tube is 1000 mm 3'3" long and 50 mm 1.
97" in diameter; your machine should have a little bit more space to allow proper fit. Versatile engraving tool: installed in your laser machine, this tube's 4mm 0016"-diameter beam can work as an acrylic, paper, cloth, plastic, cutter, and wood engraver, cardboard, ceramic, glass, leather, and marker.
Powerful laser tube: orion motor tech's co2 laser tube is rated at 60w and can sustain beams as high as 50W for short periods of time, although this will shorten its 4500-hour service life; it operates at 18 kV and 15 mA or less.
Laser Type:class 1. Safe and sound: the inner tube for the engraving laser beam is surrounded by a water pipe and hermetically-sealed outer tube to keep it cool and high functioning; ports at either end allow easy connection to your water reservoir and pump.
50mm Diameter for Laser Cutter and Engraving MachineUpgraded Version, Easy Installation and Stable Power, TEN-HIGH CO2 Glass Laser Tube 40W 700mm LengthPeak 45WTEN-HIGH
- Metal head: with metal head on the negative pole, it is not easy to crack like the glass head style and more resistant to high temperatures. Stable output: with excellent sealed-off technology to divide air and prevent inside gas diffusion, the laser tube has very stable output power and good spot mode.
Special coating technology: this co2 laser tube adopt inner discharge tube coated with nanogold catalyst technology, power is 10% improved, and service life is 20% longer than ordinary laser tube, better chooice for the people who has heavy workload and long working hours.
Easy installation:the high voltage protective sleeve on positive pole and the terminals on negative pole had been connected in advance, just connect the high-voltage sleeve and the wiring terminals to the positive and negative poles of the laser power supply respectively will be ok.
Special design on positive pole: for high-voltage wiring, adopts new tin soldering technology & insulation heat-shrinkable tubing and insulation silicone protective sleeve solves the leakage and static electricity problems that are often happened when using the old version laser tube, and will no longer cause the dust to be charged to generate crackling discharge noise.
TEN-HIGH CO2 Glass Laser Tube 50W 800mm Length, 50mm Dia for Laser Engraving and Cutting MachineUK StockTEN-HIGH
- Strong heat resistance：the tube body is made of glass containing high borosilicate, not easy to deform, the tube body is hard, and it is not easy to crack at high temperature, heat resistance is strong, the service life can reach 1500H-2500H under normal use.
Application: this co2 laser tube compatible with all the co2 laser engraving and cutting machine that used laser tube as power, but please make sure your machine's installation space, like the diameter and length, all should be a little bigger than laser tube's size.
Stable output: single mode output mode, strong penetrating power, fine spot, no change in long-term use spot mode. Easy installation: the wire on positive pole and negative pole had been connected in advance, just connect to the wire on the machine and cover with insulating tape will be ok.
Unique technology: with excellent sealed-off technology to divide air and prevent inside gas diffusion, the laser tube will be more stable and efficient. About the installation of laser tube, here is a video for your reference : https://youtu. Be/mbwyveQZPZ8.
|Height||5 cm (1.97 Inches)|
|Length||80.01 cm (31.5 Inches)|
|Width||5 cm (1.97 Inches)|
Cloudray 10Meter High Voltage Cable Flexible Silicone for CO2 Laser Power Supply and Laser Tube10M 50KVCloudray
- Available high-power supply:130w, 150w, 200w etc. High voltage cable between the C02 power supply and CO2 laser tube for laser cutting machine.
Material silicone resin, Tinning Copper, Withstand Temperature 150°C. Wire length 10m, cable outer dia 5. 2mm017''; withstand Voltage 50KV. Product name silicone Wire External Color Red.
CO2 Laser Tube Holder Diameter 60 mm Metal Holder for CO2 Laser Engraving MachineMCWlaser
- High-quality materials: CO2 laser tube holders are made from superior quality plastic aluminium oxide. Packing list: laser tube mount x 2 pieces. Easy adjustment: convenient to set the tube height with the lift screw, adjustable height is 85-130 mm.
Easy to install: easy to install and disassemble without tools. Application: used in laser engraving machine and cutting machine.
Cloudray 60W CO2 Laser Power Supply 220V HY-T60 for CO2 Laser Tube T SeriesCloudray
- Laser power adjustment: input 0V to 5V analog signal, can also input PWM signal. Protection switch is to check the outside water, ventilation, etc. Good power stability and strong adaptability, It can prolong the laser tube service life.
Zero-current half-bridge soft-switching circuit. High efficiency and fast response. Match various manufactures of laser tubes. Easy control: the start and stop of laser can be easily controlled by TTL level. Open circuit protection Function: avoid the damge to lasr power supply due to laser tube burst.