As an Amazon Associate I earn from qualifying purchases.1. SabreCut
3 x SabreCut SCRKSQ2KR SQ2 89mm 152mm Bits and Magnetic Booster Screw Holder Compatible with Kreg Pocket Hole Jig Screws
SabreCut - Forged tip for greater resistance and a longer lifetime. Sabrecut revolution professional quality screwdriver bits specially designed for use with drill drivers.
Unlike other magnetic screw holders, the bit Booster has been designed so that it is placed away from the bit and the fastener, which means there is less chance of breakage during the most demanding of applications. The sabrecut bit booster offers outstanding hold, even the most awkward to reach, stability and accessibility in all screwdriving applications, reach, thanks to its dual magnets.3
3 piece sq2 89mm and 152mm bits plus a Magnetic Booster with a reusable Pouch. Tough heat-treated bits for improved durability and torsion zone for reduced breakage. 3 piece sq2 89mm and 152mm bits plus a Magnetic Booster with a reusable Pouch.
2. FIRSTINFO TOOLS FIT YOUR NEEDS
Low Profile Bits Driver Reversible with 72T Gear Action, FIRSTINFO 1/4 Inch Mini Midget Ratchet Pocket Screwdriver, Hexagon Bit Holder
FIRSTINFO TOOLS FIT YOUR NEEDS - Micro ratcheting mechanism -- 72T reversible ratcheting mechanism produces a minimal sweep of 5 degrees. Compatible for various usage -- the lightweight bit adapter accepts any 1/4 inch hex bits of all styles. It performs well in confined locations on engines, industrial machines, electrical, household appliances, aerospace, medical and dental equipment, Steinway pianos, applications that require fine calibration, sound and lighting equipment, electronics, and more.
Durability -- made in Taiwan, well aluminum construction for strength and durability. Compact size -- 1/4" hexagon bit driver, traditional ratcheting screwdriver or stubby screwdriver might be too large or bulky to fit, 3.
8 inch long and 037 inch thick driver handle is small enough for operation in confined places/ tight spaces/ tight spot where traditional bit driver, comes with midget size, rendering easy fastening and unfastening with sufficient torque, especially in awkward places like U shape corner, lateral surface, etc. Low torque applications -- mini length fits comfortably in hand for low-torque applications.
3. DEWALT
Dewalt pivoting bit Holder, DT7505
DEWALT - Suitable for impact wrench. Magnetic. Original Dewalt quality. Foldable bit holder. Robust and durable.
| Brand | DEWALT |
| Manufacturer | Dewalt |
| Height | 15.01 cm (5.91 Inches) |
| Length | 45.01 cm (17.72 Inches) |
| Weight | 0.05 kg (0.1 Pounds) |
| Width | 35 cm (13.78 Inches) |
| Part Number | DT7505-QZ |
| Model | DT7505-QZ |
4. SabreCut
Milwaukee, Makita, Bosch and Others, 4 Piece SabreCut SCRK1 Magnetic 60mm and 152mm Professional Impact Bit Holders with 2 x 32mm PZ2 Screwdriver Impact Bits Compatible with Dewalt
SabreCut - Black oxide finish for corrosion resistance. C ring holds the bit securely. Impact bit holder designed for impact drivers and high-powered drill drivers. Heat treated custom engineered steel for maximum strength and durability.
Professional quality Impact Bit Holder and Impact Driver Bits supplied with a Pouch. Precision milled profile for optimum fit results in less cam out. Tough heat-treated bits for improved durability and torsion zone for reduced breakage.
4 piece sabrecut revolution kit including powerlok 60mm and 152mm Magnetic Impact Bit Holder and 2 x 32mm Magnetic PZ2 Impact Bits with a Pouch. Rare earth magnet, High torque & pull force. Impact torsion screwdriver bits. 4 piece sabrecut revolution kit including powerlok 60mm and 152mm Magnetic Impact Bit Holder and 2 x 32mm Magnetic PZ2 Impact Bits with a Pouch.
5. Trend
Silver, Trend SNAP/TH/1 Heavy Duty Fabric Tool Holder with Pencil. 30 Elasticated Loops to Hold Accessories not Supplied
Trend - Belt strap. Heavy duty fabric tool holder. Elastic pockets. Velcro fastening. Holder only--no tools supplied.
| Brand | Trend |
| Manufacturer | Trend |
| Height | 6 cm (2.36 Inches) |
| Length | 26 cm (10.24 Inches) |
| Weight | 0.21 kg (0.47 Pounds) |
| Width | 16.3 cm (6.42 Inches) |
| Part Number | SNAP/SQ/1 |
| Model | SNAP/TH/1 |
6. NoCry
Balanced Fit for Cordless T-Drills, 17 Accessory Pockets and Open Loops for Tool and Bit Storage, Belt-Attachment, NoCry Fast Draw Drill Holster
NoCry - 8 closed pockets hold screws, and small parts; 5 elastic pockets with closed bottoms for quick access to drill bits; 4 open loops for hanging pliers, screwdrivers, wire cutters, drill extension rods, and more; 600D ballistic canvas construction double stitched for durability.
Hangs on your favorite belt. If you’re not completely satisfied with your heavy duty drill holster, we'll make it right by replacing it or giving you a polite and quick refund - without needing to send yours back. No more bending down to pick up your drill; snug fit to keep your T-handle cordless power drill, roofs, or power screwdriver close at hand for when you need it; frees your hands so you can move with confidence and safety on ladders, impact wrench, hammer drill, and scaffolding.
For people who make things happen. Practical.
Nocry no hassle guarantee. Fitted and balanced angled holster design with an open bottom holds your drill or driver securely while allowing it to go in and out without a hitch; 19. 8 cm safety strap with plastic clip buckle fits even large drills and is velcro-backed to stay out of the way while you’re working. Saves your back. This drill holder has an opening on the back to attach to your belt, padded belt, or tool belt up to 8 cm wide; comfortable to wear even when carrying a heavy-duty impact driver or a cordless rotary tool.
| Brand | NoCry |
| Manufacturer | NoCry |
| Height | 7 cm (2.76 Inches) |
| Length | 28 cm (11.02 Inches) |
| Width | 17.5 cm (6.89 Inches) |
| Part Number | NoCry25 |
| Model | NoCry25 |
| Warranty | LIMITED LIFETIME WARRANTY - If you're not happy with your NoCry product, please contact us within 30 days of receiving it at [email protected] to return it for free for a replacement product or to receive a full refund. Each NoCry non-electric product is warranted to be free of defects in material and workmanship for as long as the consumer owns the product. Warranty does not cover normal wear and tear, environmental factors, accidental damage, or misuse. At NoCry's discretion, a defective product will be repaired or replaced. This warranty gives you specific legal rights, but may be superseded by any other rights or warranties in effect, which may vary based on your local jurisdiction. If you think you might have a defective product, please contact us at [email protected] to start the (free) procedure to determine whether your product is defective. More info at https://nocry.com/warranty |
7. Faithfull
2.4 cm*26.8 cm*20.4 cm, Faithfull FAI13 Bit Roll 13 PockET
Faithfull - The package width is 405. 0 millimeters. The package weight is 022 kilograms. The package length is 26. 8 centimeters. The package height is 2. 4 centimeters.
| Brand | Faithfull |
| Manufacturer | Faithfull |
| Height | 2.4 cm (0.94 Inches) |
| Length | 26.8 cm (10.55 Inches) |
| Weight | 0.22 kg (0.49 Pounds) |
| Width | 20.4 cm (8.03 Inches) |
| Part Number | FAI13 |
| Model | FAI13 |
8. C.K Magma
C.K Magma MA2740 3 Pocket Pack
C.K Magma - Constructed from heavy Duty, tear-resistant polyester for protection. Can be clipped onto belt & bag. Colour coded for efficient organisation. Ideal for safely storing all those loose items you need to keep in one place. Tough, see-through rear panel for clear visibility of contents.
| Brand | C.K Magma |
| Manufacturer | C.K Magma |
| Height | 4 cm (1.57 Inches) |
| Length | 22.5 cm (8.86 Inches) |
| Width | 16.5 cm (6.5 Inches) |
| Part Number | MA2740 |
| Model | MA2740 |
| Warranty | 1 year manufacturer. |
9. Nuovoware
Nuovoware Magnetic Wristband Tool Holder for Mens, Nails, 15 Inch Magnetic Wrist Bands Tool Belt Carpenters Tool Holder with 15 Strong Magnets & Pockets for Holding Screw, Drill Bits
Nuovoware - Universal design, light and adjustable, the back is made of soft mesh fabric, which can be used for a long time. A perfect gift: perfect gift for man, boyfriend, mechanic, engineer, valentine's day gifts, Christmas gifts, diy handyman, father, husband, electrician, carpenters.
High quality: made of durable and breathable material, the inner mesh provides incredible breathability to ensure comfort throughout the day. Size: measures 14. 96 x 3. 54 x 055 inch / 38 x 9 x 1. 4 cm. Suitable for father's Day gifts, Thanksgiving Day gifts and Birthday gifts.
Two pockets for storing non-magnetic tools, nails, drill bits, two newly upgraded side pencil pockets and two horizontal pencil pockets are available to choose from.15 stronger magnets: the magnetic wristband is embedded with 15 N45 strong magnets, perfect for holding screws, bolts, nails, which are effectively placed throughout the wristband, covering almost the entire wrist.
Help him complete DIY work more easily and comfortably. The front is made of 1680D polyester, suitable for almost all wrist sizes. Ours is stronger than comparable products and have a larger magnetic area, etc. A must-have for a toolbox. Sophisticated design: large magnetic space is convenient for storing and fixing magnetic objects such as screws, screwdrivers, nuts, washers and bolts.
| Brand | Nuovoware |
| Manufacturer | Nuovoware |
| Height | 1.4 cm (0.55 Inches) |
| Length | 38 cm (14.96 Inches) |
| Weight | 0.1 kg (0.22 Pounds) |
| Width | 8.99 cm (3.54 Inches) |
SabreCut - Forged tip for greater resistance and a longer lifetime. Sabrecut revolution professional quality screwdriver bits specially designed for use with drill drivers.
FIRSTINFO TOOLS FIT YOUR NEEDS - Micro ratcheting mechanism -- 72T reversible ratcheting mechanism produces a minimal sweep of 5 degrees. Compatible for various usage -- the lightweight bit adapter accepts any 1/4 inch hex bits of all styles. It performs well in confined locations on engines, industrial machines, electrical, household appliances, aerospace, medical and dental equipment, Steinway pianos, applications that require fine calibration, sound and lighting equipment, electronics, and more.
DEWALT - Suitable for impact wrench. Magnetic. Original Dewalt quality. Foldable bit holder. Robust and durable.
SabreCut - Black oxide finish for corrosion resistance. C ring holds the bit securely. Impact bit holder designed for impact drivers and high-powered drill drivers. Heat treated custom engineered steel for maximum strength and durability.
Trend - Belt strap. Heavy duty fabric tool holder. Elastic pockets. Velcro fastening. Holder only--no tools supplied.
NoCry - 8 closed pockets hold screws, and small parts; 5 elastic pockets with closed bottoms for quick access to drill bits; 4 open loops for hanging pliers, screwdrivers, wire cutters, drill extension rods, and more; 600D ballistic canvas construction double stitched for durability.
Faithfull - The package width is 405. 0 millimeters. The package weight is 022 kilograms. The package length is 26. 8 centimeters. The package height is 2. 4 centimeters.
C.K Magma - Constructed from heavy Duty, tear-resistant polyester for protection. Can be clipped onto belt & bag. Colour coded for efficient organisation. Ideal for safely storing all those loose items you need to keep in one place. Tough, see-through rear panel for clear visibility of contents.
Nuovoware - Universal design, light and adjustable, the back is made of soft mesh fabric, which can be used for a long time. A perfect gift: perfect gift for man, boyfriend, mechanic, engineer, valentine's day gifts, Christmas gifts, diy handyman, father, husband, electrician, carpenters.
