As an Amazon Associate I earn from qualifying purchases.1. HOUSLER
HOUSLER®Dual Flush Fits all Push button Toilets 2 and 1.5 inch flush replacement valve with wire
HOUSLER - Suitable for close couple WC and also back to wall concealed toilets with cupboard. 1. 5 and inch 2 outlet Fits all WC's and Plastic Tanks. Quality Product by Housler. Approved by ce, upC, WRAS etc. Adjustable flush 6/4 lt or 4/2. 6 lt. Adjustable height and overflow 20-28CM.
2. HOUSLER
HOUSLER®Dual Flush Fits all Handle toilet flush replacement valve with 1.5inch and 2 inch outlet METAL CHROME HANDLE
HOUSLER - Metal handle with small and big flush. 2 inch and 1. 5 inch internal bottom outlet. Not on the top of the lid. Approved by ce, wras, upC, Adjustable overflow and Height.
Simple to install, replaces older syphons. Silicon seal is free from leakage. Complete replacement for side and front operated cisterns. Suitable for tanks that Hole for hande is on the side or front.
3. Nuanchu
4 Pieces Flush Valve Base Sealing Washer Flush Valve Seal Replacement Clear Toilet Washer Silicone Diaphragm Washer Syphon Washer Siphon Bell Gasket, 63.7 x 34.5 x 2.3 mm
Nuanchu - Fit for most toilet tanks: each flush valve seal measures approx. Convenient for you to replace: first you need to turn off the faucet of the toilet tank, reach into it and pull the sealing ring off the plug, replace the sealing ring with a syphon washer, and then turn on the faucet again.
Sufficient for you to use or replace: there are 4 pieces of replacement clear toilet washers in the package, enough to meet your use or replacement demands, and you can share them with your neighbors.
63. 7 x 34. 5 x 2. 3 mm/ 2. 51 x 1. 36 x 009 inches, suitable for most toilet tanks, please confirm whether the size of your toilet tank is appropriate before purchasing.
Serve you for a long time: our flush valve base sealing washers are made of quality silicone material, hard to tear or break, flexible and reliable to use, and can provide you with a long term service. Save your time and energy: these silicone diaphragm washers are abundant for you to replace the broken ones, saving your time and energy, so you don't need to buy others, bringing you a pleasant use experience.
4. Geberit
Geberit Replacement Dual Flush Cistern Valve Main Body Only Twico-1 240.280.00.1
Geberit - Item is illustrated as item 4 in the detailed picture. Just a simple dIY Replacement; no expensive plumbing required. Genuine Geberit Part. Please note the valve has no bridge at the top and no bayonet/cradle at the bottom. Replace any Twico 1 valve main body.
| Brand | Geberit |
| Manufacturer | Geberit |
| Height | 7.01 cm (2.76 Inches) |
| Length | 24.99 cm (9.84 Inches) |
| Weight | 0.2 kg (0.44 Pounds) |
| Width | 7.01 cm (2.76 Inches) |
| Part Number | Twico 1 Main Body only |
| Model | K12974 |
5. tooloflife
Adjustable Toilet Fill Valve High Performance Toilet Replacement Part
tooloflife - Easy to install, which is convenient to use, save time and effort. Quality material makes it firm and durable. Maximize toilet performance and save water. Silent water saving, noisy, slow filling valves with the quietest, powerful toilet fill valve. Size: 21-30cmadjustable.
6. Homeswitch
OD60-75MM Toilet Flush Valve Toilet Push Button Valve Replacment 21 x 12cm White
Homeswitch - The height of the toilet tank is above 18cm, the outlet hole can be installed between 60MM-75MM, and the twist hole can be installed within 17mm-38MM. This model is suitable for retrofitting old toilets. Easy to install, water faster, feel light buttons, more clean!.
This product is a water-saving type, there are two adjustable gear, you can replace the old side press, front by a single row. This product is a water-saving type, you can replace the old side press, there are two adjustable gear, front by a single row.
7. FLUSHDADDY
2-Inch, FLUSHDADDY NP253 Dual Flush Drop Valve
FLUSHDADDY - Model number: NP253. Package dimensions: 13. 0 l x 33. 2 h x 13. 7 w centimeters. Dual flush valve. Item package quantity: 1. 0 .
| Brand | FLUSHDADDY |
| Manufacturer | Mark Vitow Ltd |
| Height | 22 cm (8.66 Inches) |
| Length | 12.5 cm (4.92 Inches) |
| Width | 7.6 cm (2.99 Inches) |
| Part Number | NP253 |
| Model | NP253 |
| Warranty | 1 year warranty. |
8. THETAG
Toilet Dual Flush Push Button, 2 Pack Toilet Button Flushing Round Head Toilet Flush Button Replacement Accessories for Bathroom Toilet Water Tank Repair
THETAG - Fit for: compatible with most dual flush toilets, suitable for the toilet lid with a button hole size of 38-43mm, the rod can be cut according to the needs of use to adapt to the height of the water tank.
Important: please compare with your current flush button to ensure the threads, rod and size are compatible. Package included: 2 pcs water tank valve push buttons and 4 pcs 11mm rods.
High quality: electroplated Chrome finish on hard wearing plastic, our toilet water tank push buttons with stainless steel spring which is durable. Product application: the double-push flush toilet button is compatible with most double-bath toilets or water tanks.
9. VeeBath
VeeBath Pro Lever Operated Dual Flush Valve Overflow 2 Piece Toilet Cistern WRAS Approved
VeeBath - 5 year guarantee - excluding serviceable parts, neglect or abuse of product after purchase. Ideal replacement - the pro bottom Entry Infill Valve Pro Side Entry Inlet Valve is ideal for replacing worn and faulty valves.
Why veebath? - manufactured specifically with the end-user in mind, Veebath products are durable and offer great value.
Dimensions- height: 215mm, length: 117mm, Width: 117mm. Complete pack - made of rigid plastic, hard-wearing / Built in Overflow tube / WRAS appoved / Adjustable water flow / Solid Heavy Ceramic Lever. Manufacturered with the latest technology to be cost-effective and promise a brand new look to liven up any bathroom style.
| Brand | VeeBath |
| Manufacturer | VeeBath |
| Height | 21.5 cm (8.46 Inches) |
| Length | 11.7 cm (4.61 Inches) |
| Weight | 0.59 kg (1.3 Pounds) |
| Width | 11.7 cm (4.61 Inches) |
| Part Number | SIPL10 |
| Model | SIPL10 |
| Warranty | 12 months guarantee. |
Nuanchu - Fit for most toilet tanks: each flush valve seal measures approx. Convenient for you to replace: first you need to turn off the faucet of the toilet tank, reach into it and pull the sealing ring off the plug, replace the sealing ring with a syphon washer, and then turn on the faucet again.
Geberit - Item is illustrated as item 4 in the detailed picture. Just a simple dIY Replacement; no expensive plumbing required. Genuine Geberit Part. Please note the valve has no bridge at the top and no bayonet/cradle at the bottom. Replace any Twico 1 valve main body.
tooloflife - Easy to install, which is convenient to use, save time and effort. Quality material makes it firm and durable. Maximize toilet performance and save water. Silent water saving, noisy, slow filling valves with the quietest, powerful toilet fill valve. Size: 21-30cmadjustable.
Homeswitch - The height of the toilet tank is above 18cm, the outlet hole can be installed between 60MM-75MM, and the twist hole can be installed within 17mm-38MM. This model is suitable for retrofitting old toilets. Easy to install, water faster, feel light buttons, more clean!. This product is a water-saving type, there are two adjustable gear, you can replace the old side press, front by a single row. This product is a water-saving type, you can replace the old side press, there are two adjustable gear, front by a single row.
THETAG - Fit for: compatible with most dual flush toilets, suitable for the toilet lid with a button hole size of 38-43mm, the rod can be cut according to the needs of use to adapt to the height of the water tank.
VeeBath - 5 year guarantee - excluding serviceable parts, neglect or abuse of product after purchase. Ideal replacement - the pro bottom Entry Infill Valve Pro Side Entry Inlet Valve is ideal for replacing worn and faulty valves.
